MobilePhone Plugin

[pierrotm777]

This plugin add the Phone capability to iCarDS.
Этот плагин Добавить в телефон возможность iCarDS

It's based on the Driveline code by ClockWork.
Он основан на трансмиссии код по маслу

Все тип смартфон принимается (Android, iPhone and Windows).

Его нужно покупать программное обеспечение драйверов bluesoleil here (http://www.bluesoleil.com/products/S0001201005190001.html).

It need to have the framework .NET in version 3.5 installed !!!
Это нужно иметь платформы .Net в версии 3.5 установлен !!!

With this plugin, you can:
С помощью этого плагина, вы можете:
-Call and receive calls (HFP profile).
-Extract your contacts with all infos and photo from your phone (PBAP profile).
-Create a new contact and save it in your phone (OPP profile).
-Read unread message and send message (MAP profile).
-Use your phone as modem when you have no wifi connection (PAN profile).
-Use your phone as player (AVRCP profile).
SPP and FTP profiles are also ready.

The plugin is ready now to use with iCarDS in this version 1.5.4.
Плагин готов к работе с iCarDS в этой версии 1.5.4.

MobilePhone экранов (Главная, настройки, поиск, избранное, клавиатура):

Установка:
-Закрываем iCarDS, если запущен.
-Устанавливаем iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.6.9 DS Setup.exe из архива.
-Запустить iCarDS.
-Удерживайте кнопку на главном экране и выбрать "телефон" (в верхнем правом положении).
-Нажмите на эту кнопку телефоне (теперь вы находитесь в настройках).
Если ваш телефон работает в паре с bluesoleil, вы видите его в списке параметр.
Выберите Ваш телефон и использовать кнопку "применить".
-Выйти из настроек и нажать на кнопку телефона .
-бросить iCarDS и перезапустить его.

Download installer:
iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.6.9 DS Setup.zip (http://www.mediafire.com/file/52mtwf1f6x0vg5z/iCarDS_Plugin_BTMobilePhone_%28PBAP_%26_MAP_servic es%29_V1.6.9_DS_Setup.zip)


After, the version 1.5.3, the installation is automatic !
(setting.ini, skin.ini and ExecTBL.ini files are backup and updated. All skin files are added into your chameleon skin folder)


I want to say again and again a great thanks to ClockWork for his code !!!

Good use !

How to use the plugin in Video:
Setup:
https://youtu.be/XyLNn0ThM0I
Contacts:
https://youtu.be/9qwdz-GRVGE
BluSoleilTest.exe:
https://youtu.be/6LNRXXrchOU
Extract vcard , build lists and read SMS:
https://youtu.be/iZrqyptrEWw

[pierrotm777]

What do think about that !
Mobile phone is now ready for icards !
I need help for the screens !

See first post for download the files !: Rolleyes2:

[Lexx09]

Pictures must do the size of 1024x600 instead of 800x600, or they do not fill the entire screen.
There is no translation.
In the skin settings location of the buttons is old.

[duzzy]

Hi!
You can record a video of the installation of your plugin in iCarDS on a virtual machine?


I can describe the installation in Russian. So you could update your first post.

[duzzy]

Пытался ставить плагин на виртуалке, что то ставится))) как этим пользоваться не понятно вообще...

вот видос записал (https://drive.google.com/file/d/0B60qIBsIiUkgYVBRMU9Gb0FzZFE/view?usp=sharing), хз правильно я делал или нет но все кнопки в настройках скина съехали в ж....:jester:

[seriousstas]

duzzy
А ты из первого поста изменения вносил ?

[pierrotm777]

See how to copy !

[duzzy]

duzzy
А ты из первого поста изменения вносил ?

Да нет вроде не вносил... а было нужно ? Вроде инсталлер что то правит в файлах...

Если честно то вообще не понятно что нужно делать... ладно на виртуалке все портить снес и опять поставил, а если у кого ума хватит в авто эту штуку поставить))) и привет переустановка икара.

Я у него уже просил видос отснять по установке в виртуалке... и тишина. Сейчас еще попрошу, и еще о том как он живьем работает.

[duzzy]

pierrotm777

Please record a video how to install and show how the plugin works in a virtual machine(Vbox (https://www.virtualbox.org/) or VMWare player (http://www.vmware.com/ru/products/player)... or in another virtual environment).

[seriousstas]

pierrotm777
Can be used :
http://www.faststone.org/FSCaptureDetail.htm

[Lexx09]

How can i create a button with the RR command MOBILEPHONE ?

Из архива извлечь файл ExecCommand.exe в папку Мои документы\iCarDS\skins\Chameleon\Scripts.
Идем в Настройки скина > Скрипты и внешние программы > Скрипты на динамических кнопках.
Кликаем на пустую кнопку.
Кликаем на поле "Скрипт" и выбираем файл ExecCommand.exe.
Параметры - LOAD^MOBILEPHONE.skin.
Картинку и название выбираем/пишем сами по вкусу.
Долгий клик на любую динамическую кнопку на главном экране > Простое нажатие на кнопку > Внешние программы и скрипты > Выбираем ранее созданную кнопку.

[Lexx09]

Установка:

Закрываем iCarDS, если запущен.
Устанавливаем iCarDS Plugin BTMobilePhone (vcard used) V1.4.0 beta Setup.exe из архива iCarDS Plugin BTMobilePhone (vcard used) V1.4.0 beta Setup.zip.
Содержимое папки Chameleon_AddOns из архива Sample Skin_PBAP_DS.zip извлекаем в папку Мои документы\iCarDS\skins\Chameleon с заменой.
Содержимое папки iCarDS_AddOns из архива Sample Skin_PBAP_DS.zip извлекаем в папку C:\Program Files (x86)\TipTop software\iCar DS с заменой.
Запускаем iCarDS, в настройках скина на последней странице ставим галку "MobilePhone".
Закрываем iCarDS. Запускаем iCarDS. Закрываем iCarDS.
Открываем появившийся файл C:\Program Files (x86)\TipTop software\iCar DS\Extentions\MobilePhone\MobilePhone.xml. В строке <PhoneDeviceName>NONAME</PhoneDeviceName> - вместо NONAME пишем название устройства (смотрим в конфигураторе или Bluesoleil).
Делаем это (http://pccar.ru/showpost.php?p=359772&postcount=26).

Плагин очень сырой. Соединение нестабильное. Уровень сигнала и батареи не показывается. Ошибка при запросе списка контактов. Скин рассчитан на разрешение 800х600, а не 1024х600, как в iCarDS, поэтому пустые полосы по бокам. Расположение кнопок в настройках скина старое, не такое, как в моих сборках.

[pierrotm777]

I understand that iCarDS don't accept the line that define an icon by cltext/cldesc like:
ICOC:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\Photo\0557590878.jpg

So , i suppose i must to use CLSETIMG;1;Myimage.jpg into my plugin , excact ?

[pierrotm777]

Из архива извлечь файл ExecCommand.exe в папку Мои документы\iCarDS\skins\Chameleon\Scripts.
Идем в Настройки скина > Скрипты и внешние программы > Скрипты на динамических кнопках.
Кликаем на пустую кнопку.
Кликаем на поле "Скрипт" и выбираем файл ExecCommand.exe.
Параметры - LOAD^MOBILEPHONE.skin.
Картинку и название выбираем/пишем сами по вкусу.
Долгий клик на любую динамическую кнопку на главном экране > Простое нажатие на кнопку > Внешние программы и скрипты > Выбираем ранее созданную кнопку.

Thanks ,
1 to 6 is OK !
But when i hold a button , i don't find the Externals program button !

[pierrotm777]

Hello,
I have worked a lot from yesterday to today on the code and i obtain now the pictures attached !!!

As you can see , the screens are now well in 1024 .
The screen picture are always the Crawings but at the end we will have iCarDS screen format !

I have always an issue with the slider:

I define it into the screen like that:
S02,725,58,102,14,421,58,102,14,H,"Sliders\bar.png",,60,"MOBILEPHONE_BATTERYSTRENGTH",""
S01,458,58,102,14,151,58,102,14,H,"Sliders\bar.png",,60,"MOBILEPHONE_SIGNALSTRENGTH",""

It is correct ?
and my VB.NET code is:
Public Function ReturnSlider(ByRef SLD As String) As Integer

'This tells RR that the Slider was not processed in this plugin
ReturnSlider = -1

Select Case LCase(SLD)
Case "mobilephone_batterystrength"
ReturnSlider = Math.Truncate(hfpBatteryPct * 65535 / 100)
Case "mobilephone_signalstrength"
ReturnSlider = Math.Truncate(hfpSignalPct * 65535 / 100)

Case "songpos"
Case "mobilephone_avrcp_trackpos"
'If avrcpTrackPos >= 0 And avrcpTrackLen >= 0 Then
' Dim posSpan As New TimeSpan(0, 0, avrcpTrackPos)
' Dim lenSpan As New TimeSpan(0, 0, avrcpTrackLen)
' AVRCP_lblAVpos = "Pos: " & posSpan.Minutes & ":" & Format(posSpan.Seconds, "00") & " / " & lenSpan.Minutes & ":" & Format(lenSpan.Seconds, "00")
'End If
ReturnSlider = Math.Truncate(avrcpTrackPos * 65535 / avrcpTrackLen)

End Select

I upload the last dll and screens (1024x600) for test !!!!
See the first post please !

Thanks for any help !

[pierrotm777]

Good news, the sliders run now (see the picture attached)!!!
See first post for screens updated and dll !

Хорошие новости, ползунки запустить сейчас (см. прикрепленное изображение)!!!
Смотрите первый пост на обновленных экранах и dll !

[pierrotm777]

First screen iCarDS !

Первый экран iCarDS !

I try to call a command when i click on the list !
Я пытаюсь вызвать команду, когда я нажимаю на список !
Я постарался Добавить в ExecTBL.ini-файл:
"ONCLCLICK","MOBILEPHONE_UPDATECL",phoco.skin


и в phoco.файл обложки:
Script,OnScreenStart,ONCLCLICK,MOBILEPHONE_UPDATEC L,phoco.skin

How can i do !

[pierrotm777]

No body can help me please ?

Никакое тело не может помочь мне, пожалуйста ?

[seriousstas]

Unfortunately there is no development here. Only on its own :)

[pierrotm777]

I have found an error on the code that can crash iCarDS when the plugin start !
This issue will be solved in the last version v1.4.3 !

[pierrotm777]

Try the v1.4.3 please !
Main command is MOBILEPHONE and not LOAD;MOBILEPHONE.skin

[pierrotm777]

Last version v1.4.5 !

Hope you will like this new version !

[seriousstas]

Last version v1.4.5 !

Hope you will like this new version !

Prompt how to install this?
1,2,3 ...
Not clear that this : New BTMobilePhone
and : iCarDS Plugin BTMobilePhone (vcard used) V1.4.3 beta
Different plug-ins?

Changes are needed in the header that topics (ExecTBL.ini, setting.ini: cf_ind.txt ...) or just the installer?

Please describe in detail what to do?

If the latest version Last version v1.4.5!
where is the installer? I see only iCarDS Plugin BTMobilePhone (vcard used) V1.4.3 beta Setup.exe

[pierrotm777]

Из архива извлечь файл ExecCommand.exe в папку Мои документы\iCarDS\skins\Chameleon\Scripts.
Идем в Настройки скина > Скрипты и внешние программы > Скрипты на динамических кнопках.
Кликаем на пустую кнопку.
Кликаем на поле "Скрипт" и выбираем файл ExecCommand.exe.
Параметры - LOAD^MOBILEPHONE.skin.
Картинку и название выбираем/пишем сами по вкусу.
Долгий клик на любую динамическую кнопку на главном экране > Простое нажатие на кнопку > Внешние программы и скрипты > Выбираем ранее созданную кнопку.


The 7 isn't possible because hold option in the dynamic button doesn't exist as option (do nothing)
this button code:
L,313,510,290,90,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,14,#FontMainBottomSt yle#,"=$l_set_scripts_dinamic_buttons$","VHCENTER",
IMG,308,510,300,90,"$SkinPath$Theme\$ThemeButtons$\buttons\btn_300_90_ off.png",off
IMG,308,510,300,90,"$SkinPath$Theme\$ThemeButtons$\buttons\btn_300_90_ on.png",on
IMG,308,510,300,90,"$SkinPath$Theme\$ThemeButtons$\buttons\btn_300_90_ down.png",down
IMG,308,510,300,90,"$SkinPath$Theme\$ThemeButtons$\buttons\btn_300_90_ shadow_$shadow$.png",off
B,308,510,300,90,"SetVar;set_scripts_skin_status;1||ReloadScreen",
I,328,584,260,5,"ByVar;set_scripts_skin_status;$skinpath$i_Off.png<<$skinpath$i_on.png"

[seriousstas]

I see that no body want help me in this forum !
It's your problem !

Bye Bye !

It's summer ! many on holiday;)

[Евген_21]

Да знал бы как помочь помог,без проблем.
Yes he would know how to help helped,no problem.

[dk-fsb]

а где скачать можно? в первом посте нечего нет

[seriousstas]

Последняя версия плагина-это выход. См. пост 1
Use iCarDS_1.7.0.60b16.exe
The folder (after install) is copied here:
C:\Program Files (x86)\RideRunner\

I do not have plugin_RRSkinTool_is=1
but there : plugin_RRSkinTool_is=0
After all the settings according to the instructions I receive multiple errors when starting and closing Icar:
Подробная информация об использовании оперативной
(JIT) отладки вместо данного диалогового
окна содержится в конце этого сообщения.

************** Текст исключения **************
System.NullReferenceException: В экземпляре объекта не задана ссылка на объект.
в MobilePhone.modGlobalDeclare.ToLog(String TheMessage)
в MobilePhone.RRExtension.bgw_Cancel()
в MobilePhone.RRExtension.bgw_RunWorkerCompleted(Obj ect sender, RunWorkerCompletedEventArgs e)
в System.ComponentModel.BackgroundWorker.OnRunWorker Completed(RunWorkerCompletedEventArgs e)
в System.ComponentModel.BackgroundWorker.AsyncOperat ionCompleted(Object arg)


************** Загруженные сборки **************
mscorlib
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8669 (QFE.050727-8600)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
MobilePhone
Версия сборки: 1.4.9.0
Версия Win32: 1.4.9.0
CodeBase: file:///C:/Program%20Files%20(x86)/RideRunner/Plugins/MobilePhone/MobilePhone.DLL
----------------------------------------
Microsoft.VisualBasic
Версия сборки: 8.0.0.0
Версия Win32: 8.0.50727.8662 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8690 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8662 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8681 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Configuration
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8662 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8679 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
mscorlib.resources
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8669 (QFE.050727-8600)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
bvlwuuox
Версия сборки: 1.4.9.0
Версия Win32: 2.0.50727.8690 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
Microsoft.VisualBasic.resources
Версия сборки: 8.0.0.0
Версия Win32: 8.0.50727.8662 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic.resources/8.0.0.0_ru_b03f5f7f11d50a3a/Microsoft.VisualBasic.resources.dll
----------------------------------------
iCarDuino
Версия сборки: 1.0.0.12
Версия Win32: 1.0.0.12
CodeBase: file:///C:/Program%20Files%20(x86)/TipTop%20software/iCar%20DS/Extentions/iCarDuino/iCarDuino.DLL
----------------------------------------
RRPoi
Версия сборки: 1.0.0.3
Версия Win32: 1.0.0.3
CodeBase: file:///C:/Program%20Files%20(x86)/TipTop%20software/iCar%20DS/Extentions/RRPoi/RRPoi.DLL
----------------------------------------
iCarExtended
Версия сборки: 1.0.0.4
Версия Win32: 1.0.0.4
CodeBase: file:///C:/Program%20Files%20(x86)/TipTop%20software/iCar%20DS/Extentions/iCarExtended/iCarExtended.DLL
----------------------------------------
System.Windows.Forms.resources
Версия сборки: 2.0.0.0
Версия Win32: 2.0.50727.8662 (QFE.050727-8600)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms.resources/2.0.0.0_ru_b77a5c561934e089/System.Windows.Forms.resources.dll
----------------------------------------

************** Оперативная отладка (JIT) **************
Для подключения оперативной (JIT) отладки файл .config данного
приложения или компьютера (machine.config) должен иметь
значение jitDebugging, установленное в секции system.windows.forms.
Приложение также должно быть скомпилировано с включенной
отладкой.

Например:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

При включенной отладке JIT любое необрабатываемое исключение
пересылается отладчику JIT, зарегистрированному на данном компьютере,
вместо того чтобы обрабатываться данным диалоговым окном.

[seriousstas]

pierrotm777
PLEASE !!! Make a video instructions,
but better a ready installer like iCarDS_1.7.0.60b16
with the plugin, or just put it in archive Your 2 folder
iCarDS and TipTop software

[seriousstas]

What os do you use ?

Win 10
All happened at the second attempt
But I suggest simplify installation) :
http://rgho.st/8VYMtLgMR/thumb.png (http://rgho.st/8VYMtLgMR.view)

Please note - The text climbs out beyond buttons (full screen)

[pierrotm777]

Win 10
All happened at the second attempt
But I suggest simplify installation) :
http://rgho.st/8VYMtLgMR/thumb.png (http://rgho.st/8VYMtLgMR.view)

Please note - The text climbs out beyond buttons (full screen)

Firstly, did you have installed Bluesoleil and paired your phone !
If yes, you need to setup the plugin only !

Ok,
It's better !

Then, click on the 4 th left button (that create a list of the phones paired)
If you have no list, Go to Bluesoleil software and paire your phone !!!!
See the picture:
Red cercle say that the phone is paired!

The name will be added to the xml setting file automagically by the plugin !

I have added 2 video in the first post and a zip file for a manual installation !!!!

[pierrotm777]

About the button's text, i need to change that !

Installation is realy easy . Just follow my instructions one time !!!!

[seriousstas]

Excellent work!!!

Many problems with the translation (I suggest setting is not translated!), but there are other problems:
1. Switching between phone (device selection numbers) causes an error and the closure of IcarDS.
I tried on different PCs.
2. Does not work search contacts! . No change in the search language. The letters are arranged randomly, fade too quickly.
3. If BlueSoleil can not find the SMS (the rest finds all) - the icon will blink permanently ..
4. Window call too quickly disappear.
5. Manually must be called immediately printed number - Enter is unnecessary movement (there is the same need to add a complete cleaning of the window at the touch, it is better to open input window blank.).

Add more, the contacts is not sorted by alphabet - it is almost not possible to make search

[pierrotm777]

Excellent work!!!
Thanks

Many problems with the translation (I suggest setting is not translated!)
The language russian file is under C:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\Languages\russian\russia n.txt
If you want help me for a better translation ?

1. Switching between phone (device selection numbers) causes an error and the closure of IcarDS.
I tried on different PCs.
The switch code isn't complete. But at the end, the code will search what phone is in the car and will switch automatically, just set to false the auto switch feature into the settings!

2. Does not work search contacts! . No change in the search language. The letters are arranged randomly, fade too quickly.
May be the keyboard search is not well done for a russian user but it run for me !
I use the french as regional language!
If you have an idea how to have the good keyboard for all language ?
Fade can by stopped by delting the line V,200.

3. If BlueSoleil can not find the SMS (the rest finds all) - the icon will blink permanently ..
I know, i need to change that !

4. Window call too quickly disappear.
When you receive a call in or when you do a call out ?
Comment the line IDL,30 into the MOBILECALL.skin screen

5. Manually must be called immediately printed number - Enter is unnecessary movement (there is the same need to add a complete cleaning of the window at the touch, it is better to open input window blank.).Can you explain please what you speak about!
You can delete a number when you use the number osk by hold the < key !

Add more, the contacts is not sorted by alphabet - it is almost not possible to make search
You can use the command that follow just after a vcard extract!
mobilephone_phonebooksort


Thanks for this debug!:rolleyes2:

[pierrotm777]

I think than your keyboard is in bad order because i have build the keyboard in ABCD order and not QWERTY or AZERTY !
We can do that for change it:
change:
L,10,7,50,34,#FontMainBottomRed#,#FontMainBottomGr een#,#FontMainBottomBlue#,22,"Arial:B","VKKEY:66",""
B,0,0,70,50,"EXIT||SETVARBYCODE;NEWKEY;VKKEY:65||SKIPTO;$NEWKEY $",
by:
L,10,7,50,34,#FontMainBottomRed#,#FontMainBottomGr een#,#FontMainBottomBlue#,22,"Arial:B","BYVAR;KBLAYOUT;VKKEY:65<<VKKEY:66",""
B,0,0,70,50,"EXIT||BYVAR;KBLAYOUT;SETVARBYCODE;NEWKEY;VKKEY:65<<SETVARBYCODE;NEWKEY;VKKEY:66||SKIPTO;$NEWKEY$",
the code 66 is an example !

Can i use the link by example ?
Or can you send me the ascii code of your alphabet in order please ?

[seriousstas]

want help me for a better translation ?
I'll try, but my English is not very ..

If you have an idea how to have the good keyboard for all language ?

I'm not a programmer - see originalnіy Telephone in IcarDS.
* There all okay and sorted in the contact list and the keyboard


When you receive a call in or when you do a call out ?

when do a call out

You can delete a number when you use the number osk by hold the < key !
ок

You can use the command that follow just after a vcard extract!
mobilephone_phonebooksort
I do not really understand this :)

Can you send a picture of your search keyboard with the bad order please ?

http://rgho.st/8zndjPBc6/thumb.png (http://rgho.st/8zndjPBc6.view)
Do you see all Cyrillic characters ?No!
26, but need :
А, Б, В, Г, Д, Е, Ё,Ж, З, И, Й, К, Л, М, Н, О, П, Р, С, Т, У, Ф, Х, Ц, Ч, Ш, Щ, Ъ, Ы, Ь, Э, Ю, Я-33

Or can you send me the ascii code of your alphabet in order please ?
This is not it? (visual-basic) :
http://vbbook.ru/visual-basic/ascii-tablica-simvolov/

Our keyboard looks like this (QWERTY):
http://ezpc.ru/OS/KBDRUW9X/kbdalt.gif
The keyboard in alphabetical :
http://www.comfort-software.com/e107_images/akeyru.jpg

more in search (if it will work for Cyrillic)
1 Need to input a word, but not the first letter
2. Need the Next button (There is such a in iCarDS_1.7.0.60b16.exe)

[seriousstas]

If i understand, you want search a complete name and not only by one letter!

(Yeah) I want to search , like "Telephone" in the original application. So as necessarily need Next Search button (do not enter the word again, and this button has recently appeared in a new installer iCarDS_1.7.0.60)
For example, to search for Andrew (his mother) : Андрей (его Мама), need to press three times "Next" (Далее):
1 Мама
2 Сергея Мама
3 Андрей (его Мама)



If i understand, for the sorted keyboard, i must to use the ascii code from 192 to 223, exact ?
I so think, but I can only test helps :) Try to ask questions in the Private box to one of the developers (http://pccar.ru/private.php?do=newpm&u=7672)

[seriousstas]

Цитата:
Сообщение от seriousstas Посмотреть сообщение
2. Does not work search contacts! . No change in the search language. The letters are arranged randomly, fade too quickly.

May be the keyboard search is not well done for a russian user but it run for me !
I use the french as regional language!

Search Russian letters works but only if the first letter of a little
(Eg andrew find, but Andrew did not find).
It is necessary to turn off the dependence of the upper-lower case

[pierrotm777]

Search Russian letters works but only if the first letter of a little
(Eg andrew find, but Andrew did not find).
It is necessary to turn off the dependence of the upper-lower case

An option that accept dependence or not on the command SEARCHLIST will be welcome !
By example:
SEARCHLIST;Myname;true (return only Myname and not myname)
SEARCHLIST;Myname;false (return Myname and mYnAme and myname ...)

[seriousstas]

Can you try this key board ?
SETVAR;KBLAYOUT;0 --> latin keyboard
SETVAR;KBLAYOUT;1 --> russian keyboard
Replaced two files:
SKIPTO_OSK.skin
MOBILEPHONE.skin
Now, if I choose to search butt - I do not see this (search)window
Nothing appears ..

..........


Why plugin reloads BlueSoleil service on startup IcarDS?
Lose time for connections (about 10 seconds).
Also not clear how to go to Contacts from the settings after connecting -
should always close the settings window, and then run the phone again - it is not convenient!

Send Video to PM (http://pccar.ru/private.php)

[pierrotm777]

Replaced two files:
SKIPTO_OSK.skin
MOBILEPHONE.skin
Now, if I choose to search butt - I do not see this (search)window
Nothing appears ..

For search by word, you need to hold the button search !

I see that your main contacts indicator is red, so you have no MobilePhone_PB.txt file under the directory:
C:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\PhoneBook\

Can you delete all the files under this directory, and you will see that on the MOBILEPHONE screen, the extract contact button (second in top right) is blinking !
When all list are ready , you receive a message and all top contacts indicators are green !!!!
You can always use the extract contact button manually !

Retry after that the search screens !
I don't understand why skipto icards command don't accept russian alphabet !
I think , we need to change the search screen for have a good use ! But i don't know well all icards command!
Where can i found all icards commands list ?

I know that the plugin stop and restart always Bluesoleil when iCards is loaded!
It's the only method, because Bluesoleil SDK is very hard to use !
The plugin need this time for run correctly !

Also not clear how to go to Contacts from the settings after connecting -
should always close the settings window, and then run the phone again - it is not convenient!

The first time you use the plugin, the xml file hasn't your phone name, so when you click on mobilephone button, the plugin go to the first setting screen !
You need to click on your phone device and after click on the 'Apply' button !
After that, the plugin run alone !
You can quit the setting's screen and click again on the mobilephone button !
This time the plugin will load the main screen and will extract alone the contacts!
After the message, just click on the main contacts button !

You have two videos that explain this part !

[seriousstas]

For search by word, you need to hold the button search!
It works on Hold.
Can be done with a single click "look next" ? - important for large books - where many repetitions

I see that your main contacts indicator is red
This is a problem of compatibility with BlueSoleil - not with the plugin

[seriousstas]

You can swap the click and hold command on this button if you want ?

I do not know about any command there is a speech.
Please make if possible re-search button: "NEXT SEARCH",
For not to open the keyboard window again and again to the same words:
http://pccar.ru/showpost.php?p=365254&postcount=67
Thnx!
It's the only method, because Bluesoleil SDK is very hard to use !
I already restarted via AutoIt script (along with IcarDS (http://pccar.ru/showthread.php?t=23331)) :
Run('taskkill /f /im BtTray.exe',"", @SW_HIDE)
Run('taskkill /f /im BlueSoleilCS.exe',"", @SW_HIDE)
Run('taskkill /f /im BsHelpCS.exe',"", @SW_HIDE)
Run('taskkill /f /im BsMobileCS.exe',"", @SW_HIDE)
ShellExecute("C:\Program Files (x86)\IVT Corporation\BlueSoleil\BtTray.exe")

And it seems only one restart enough:
BlueSoleilCS.exe

[pierrotm777]

Can you try this last screen please ?

[pierrotm777]

Can you try these other modified mobilecall screen ?
After 10 secondes, the mobilecall is exited and an overlay replace it !


I suppose than an overlay stay always on top if we change to another screen, but actually, it is exited !
If you have an idea how to do ?

[seriousstas]

I added a video in PM

1.Now stopped working SMS read (but works from BlueSoleil).
Previously it worked.

2. Search works well with large keyboard (hold) and still does not work with smallt does not work with small (single-click).
still does not work with small (single-click).
Search works, but for small letters. And all the letters are still do not have enough. It should be 32 - 26 there.

Yet sometimes when starting a window appears IcarDS falling, but IcarDS not falling - everything works well.

[seriousstas]

Run very well for me send a sms to you and you will see that sms icon is blicking when sms number is > 0 .

NEW (http://pccar.ru/showpost.php?p=365404&postcount=79) plugin does not work with messages!
Does not display the them. Always blinks search (infinitely)
I put back again iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.4.9 DS Setup.exe
and messages are displayed!
May be another video ?
this is usually when you first install or replace theme - I can not repeat - but it was several times ..

[seriousstas]

It's not normal
normal! Only with this phone.
Other - well read !
Do you wait 30s for check if SMS is running well ?
Reinstalled - to work, but strangely ..
Seeking the All - 385, then again Unrear - 68
The following start - not seeking at all.
ADD Video3

[seriousstas]

iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.0 DS Setup
"Msg Read" icon blinking after search(infinitely)


Keyboard : still does not work with small (single-click).
Search works, but for small letters. And all the letters are still not hvaaet. It should be 32 - 26 there.

[pierrotm777]

Did you have modify the settings for your country ?
<EmergencyNumber>112</EmergencyNumber>
<VocalMessageryNumber>123</VocalMessageryNumber>
and
<PhoneCountryCodes>
<string>0</string>
<string>33</string>
<string>00</string>
</PhoneCountryCodes>
Think you need to replace 33 by 7.
Think you need to keep 112 for emergency.
About your voice message and don't know !

I can change that into the installer if needed !

[seriousstas]

Can you explain , i don't understand what you say exactly !
I mean - that the letters in our alphabet of 33 and there are only 26 in a small keyboard + Search works only for lower-case letters(small keyboard!) a b c d, and does not work for the A B C D

See PM

[seriousstas]

What is it and how to translate? :
PhoneSpeechRecognitionReset
These buttons (commands) do not work! :
l_set_BTM_Update
l_set_BTM_Pair
l_set_BTM_UnPair
l_set_BTM_DeletePaired

These letters is no in a small keyboard : Б Ж Л Х Э Ю
9sLofPVlpo4

The language russian file is under C:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\Languages\russian\russia n.txt
If you want help me for a better translation ?
send to PM

[seriousstas]

If use iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.4.9 DS Setup (V1.5 DS Setup) installer with two checkboxes, at the start,
then need to do these points from the readme ?:
2.Under C:\Users\pierre\Documents\iCarDS\skins\Chameleon\L ABELS\
a) folder LABELS
copy the files found into Chameleon_AddOns\LABELS\
b) Under C:\Users\pierre\Documents\iCarDS\skins\Chameleon\l anguage\
copy the files found into Chameleon_AddOns\language\

3.Copy the files that follow under you skin directory C:\Users\pierre\Documents\iCarDS\skins\Chameleon\
cf_ind.txt
setting.skin
setting2.skin
setting3.skin
setting4.skin
setting5.skin
Think you need to replace 33 by 7.
I can change that into the installer if needed !
to replace on +38 for Ukraine
Think you need to keep 112 for emergency.
This number is correct

[seriousstas]

Actually, he don't want !
I made the correct translation + there are some problems, and after revisions, when the plugin will be stable - I think he is sure add.

Write a new instruction - I'll translate.
Readme.txt is not actual.

[seriousstas]

Definitive version 1.5.0 is out !
Unfortunately, all the old problems are present :(
1 indicator looks for SMS endlessly and constantly blinking.
2 Keypad search (by first letter) does not work! Please remove it and make basic by clicking - a second keyboard (hold).
3 All messages are recorded in dialer string - and it is not convenient then removed (screen №2)
4 Closing the "information window" (1-t screen) often leads either to freeze or to IcarDS fall.
5 Why can not you just dial the number - why should I enter?
6 New window continues to hang from the top, if you close the other button. I think - this window do not need (screen №3)

Why Prefix box? and how to change the country on your own?

[seriousstas]

should like is that Lexx09 add these add ons into the last icards version !
Said added after the stable version

[pierrotm777]

1 indicator looks for SMS endlessly and constantly blinking.
If the sms number is different to 0, the indicator is blinking always.
Read your sms with your phone , you will see that the indicator blinking is stopped and number return 0.

2 Keypad search (by first letter) does not work! Please remove it and make basic by clicking - a second keyboard (hold).
I want to keep a little keyboard for this feature (click button) but i need help for build this screen. Latin keyboard is ok but not the russian and i don't know why! May be a guy of the forum can help us ?

3 All messages are recorded in dialer string - and it is not convenient then removed (screen №2)
I don't understand why this issue ! I have not this problem why the RR version.

4 Closing the "information window" (1-t screen) often leads either to freeze or to IcarDS fall.
Do you use the log file ? If yes set log file in settings to 'false'.

5 Why can not you just dial the number - why should I enter?
Can you explain please ?

6 New window continues to hang from the top, if you close the other button. I think - this window do not need (screen №3)

It's an Overlay option that we can stop ! Just stop the idle option into the mobilcall.skin screen that call this window !

Why Prefix box? and how to change the country on your own?
The prefix list help just the user when he want call an international number !
Into the second setting's screen, click on the second right line and change with your country code.
You can also change it with a text editor (replace 33 by your code).

The two buttons under the 'Apply' (save button) are needed.
One stop any change and the second, save a default xml file!

I have the idea to have just one SMS notification after the icarDS start and only other one notification each time we receive a new sms !

PS. The last version 1.5.1 solve the iPhone issue with the sms that we can no read !

[pierrotm777]

Can you test this new keyboard !
I think that all your letters are in this version !

By default, the variable KBLAYOUT is set to 0 for your country !
SETVAR;KBLAYOUT;0

[pierrotm777]

Into the MOBILPHONE.skin screen, edit the button search with:
B,512,540,100,84,"MENU;SKIPTO_OSK.skin||SETVAR;KBLAYOUT;1",@OSKTOCMD;SEARCHNAME;SEARCHLIST;$SEARCHNAME$@

[Gadina]

also 2 th character

2 th character it should be " Б " , but not " Ь "

7 th character it should be " Ё " , but not " Я "

[pierrotm777]

also 2 th character

2 th character it should be " Б " , but not " Ь "

7 th character it should be " Ё " , but not " Я "

Thanks, i see that !

[pierrotm777]

Like that ?

[pierrotm777]

If someone can say me if this code is correct ?
"BTKEYBOARDSELECT","SETVARBYCODE;SETKBD;LANGNAME||If;strcomp($SETKBD$; RU);{SETVAR;KBLAYOUT;1};{SETVAR;KBLAYOUT;0}"

If LANGNAME = RU then KBLAYOUT =1 else KBLAYOUT = 0

And i add this in the beginning of the SIPTO_OSK screen the line:
Script,OnScreenStart,BTKEYBOARDSELECT

[Gadina]

Like that ?
Now it's right:yes4:

[seriousstas]

I think needs a "Reconnect" button for such cases:

[seriousstas]

Can you test this new keyboard !
Replaced C:\Users\Home_PC\Documents\iCarDS\skins\Chameleon\ SKIPTO_OSK.skin, but do not see the changes ..



5 Why can not you just dial the number - why should I enter?
Can you explain please ?
&
I don't understand why this issue ! I have not this problem why the RR version.
:
In the original application "Phone", I:
1 - load the shell
2 Go to the keyboard - dialed number manually
3- Press the phone call (green call button)
IT'S ALL

in MobilePhone I:
1 - load the shell
2 - Wait for 10-12 seconds
3- Go to the keyboard - erase some messages in a string instead of a number
4 - dialed number manually & Press ENTER ??? - need to immediately press the green call button
5 - Press the "Phone call"(green call button)
6 - Begins to close various information screens such as MAP is ready
http://rgho.st/69n7yLS47/thumb.png (http://rgho.st/69n7yLS47.view)
What is "MAP is ready", and why should I do the whole screen?
http://rgho.st/78V2DP279/thumb.png (http://rgho.st/78V2DP279.view)


How to disable the proposal - save contact?
It can automatically disappear?
This window is superfluous, and it continues to hang, if the disable another button :
http://rgho.st/8ZnX2QhfF/thumb.png (http://rgho.st/8ZnX2QhfF.view)

Please add to the settings:
Disable all the information window!
The prefix list help just the user when he want call an international number !
I think the prefix can be used to automatically change the window:
http://rgho.st/86ZyLCpXW/thumb.png (http://rgho.st/86ZyLCpXW.view)
Country & code
Do you use the log file ? If yes set log file in settings to 'false'.
Not using

Can you test this new keyboard !
I think that all your letters are in this version !
I'll set the keyboard mapping - all the letters, but the search still does not work for capital letters.
And all contacts letter is uppercase

[pierrotm777]

Replaced C:\Users\Home_PC\Documents\iCarDS\skins\Chameleon\ SKIPTO_OSK.skin, but do not see the changes ..

The keyboard is well updated , see my last picture.


In the original application "Phone", I:
1 - load the shell
2 Go to the keyboard - dialed number manually
3- Press the phone call (green call button)
IT'S ALL

In fact, i can simply a stop all message during the call in is a good idea !
I had one command that force the check loop!
mobilephone_stopallcheck stop or restart MAP and Network check (toogle command)
mobilephone_stopallcheck;1 stop MAP and Network check.
mobilephone_stopallcheck;0 restart MAP and Network check.


erase some messages in a string instead of a number

I see how to solve that.

need to immediately press the green call button
5 - Press the "Phone call"(green call button)
6 - Begins to close various information screens such as MAP is ready
I shall try to change the phone pad usage !


How to disable the proposal - save contact?
I can change this option if needed and do it

It can automatically disappear?
Yes, just i need to replace MENU; by POPUP; feature into the screen !


Please add to the settings:
Disable all the information window!
Done. See mobilephone_stopallcheck command



I'll set the keyboard mapping - all the letters, but the search still does not work for capital letters.
And all contacts letter is uppercase
Yes, i know that .
That is possible is to add a hold button feature for all letter that add the SHIFT command before the search !

[seriousstas]

V1.5.2_DS_Setup.zip
I do not see any changes :
ERBC5LLhK7k

[seriousstas]

Did you have change the settings that follow to true ?
Anywhere did not change anything.
Again - contacts are not added - because BlueSoleil not compatible with the phone(contacts only!).

In the video - other problems and other not convenience

[seriousstas]

issue with the contacts
No problems ! It BlueSoleil can not see contacts! :
http://muonium.rgho.st/7ztwcdmT8/thumb.png (http://muonium.rgho.st/7ztwcdmT8.view)
On other phones - all sees

[seriousstas]

I think that this version begin to be better !
sorry but I think your next version - the deception !!

[seriousstas]

Why
pierrotm777
New versions without changes

Кто желает попробовать - для работы плагина нужно сделать небольшие правки в трех файлах :
\Documents\iCarDS\skins\Chameleon\skin.ini
\Documents\iCarDS\skins\Chameleon\setting.ini
\Documents\iCarDS\skins\Chameleon\ExecTBL.ini

Установка MobilePhone Plugin :
1. setting.ini - (открыть в блокноте или любым текстовым редактором) :
добавить строку plugin_MobilePhone_is=1
найти поиском строку (нажав CTRL+F) plugin_RRSkinTool_is=0
заменить на plugin_SkinTool_is=1
(сохранить изменения)
skin.ini - (открыть в блокноте или любым текстовым редактором) :
добавить строку plugin_MobilePhone_is=1
(сохранить изменения)
ExecTBL.ini- (открыть в блокноте или любым текстовым редактором)
найти поиском строку (нажав CTRL+F) "LoadPlugins","BYVAR;plugin_SkinTool_is;<<LoadExt;SkinTools"
заменить на "LoadPlugins","BYVAR;plugin_SkinTool_is;<<LoadExt;SkinTool"
найти поиском строку (нажав CTRL+F) "CF_Phoco","Phoco||Set_PhocoMode"
заменить на "CF_Phoco","MOBILEPHONE"
Добавить строки :
"LoadPlugins","BYVAR;plugin_MobilePhone_is;<<LoadExt;MobilePhone"
/,--------------- MobilePhone ------------------------
"ONCLCLICK","MOBILEPHONE_SETTINGS_UPDATEINFODEVICE",MobilePhone_settings.skin
"ONCLCLICK","MOBILEPHONE_UPDATECL",MobilePhone.skin
"ONCLDBLCLICK","MOBILEPHONE_FAVORITE_ADD",MobilePhone.skin
"ONCLDBLCLICK","MOBILEPHONE_ADDCOUNTRYPREFIX",MobilePhone_Info.skin
"ONCLCLICK","UPDATE_IMAGE",MobilePhone_SmsModels.skin

2. Сделать установку из шапки :
iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.x.x DS Setup.zip
c чекбоксами .
3. Открыть "Телефон" в iCar DS => Обновить устройства "Список Устройств" , выбрать своё => "Применить" => "Обновить" базу данных
=> перезагрузить iCar DS и дождаться значка "Телефон" => Открыть "Телефон" и пользоваться.
Все последующие запуски после 10-ти секундного ожидания

[pierrotm777]

seriousstas,
I am not ok with you, the code run now better the skipto icards don't run as we want !
I have no issue with a latin letters ! Why issue with the russian letters ?

Did you have tried to receive a call in and see if we have a popup the the number and the name ?
If you have the two last settings to true, you would not have map popup !

I have added your translated how to into the readme file !

[duzzy]

pierrotm777,

the contact book is unreadable from my phone, it gives an error "String was not recognized as a valid DateTime." and OK button...
http://jpegshare.net/thumbs/bd/3b/bd3bde6fe04da0470fa03bece90d7d8b.jpg (http://jpegshare.net/bd/3b/bd3bde6fe04da0470fa03bece90d7d8b.png.html) http://jpegshare.net/thumbs/73/d8/73d83f788d54abb9ebb68d9473d43fdc.jpg (http://jpegshare.net/73/d8/73d83f788d54abb9ebb68d9473d43fdc.png.html)

it is unclear what kind of keyboard, how to use it and what with the alphabet and where is Russian ???
http://jpegshare.net/thumbs/b4/02/b402f77052b5f173bda664e0dad4d77a.jpg (http://jpegshare.net/b4/02/b402f77052b5f173bda664e0dad4d77a.png.html)

services supported by the phone...
http://jpegshare.net/thumbs/47/8f/478f4981bb6e0fc69e94c241ceba71c1.jpg (http://jpegshare.net/47/8f/478f4981bb6e0fc69e94c241ceba71c1.png.html)

read only dialed numbers... missed calls... and received numbers
http://jpegshare.net/thumbs/1d/e4/1de4560de30a5c597188aa390fc34c4f.jpg (http://jpegshare.net/1d/e4/1de4560de30a5c597188aa390fc34c4f.png.html) http://jpegshare.net/thumbs/23/6f/236f6300902024ebc55a52063451e4fd.jpg (http://jpegshare.net/23/6f/236f6300902024ebc55a52063451e4fd.png.html) http://jpegshare.net/thumbs/a8/c8/a8c8eae91a2bc7a451972d8693a5fd5b.jpg (http://jpegshare.net/a8/c8/a8c8eae91a2bc7a451972d8693a5fd5b.png.html)

SMS does not read at all...
http://jpegshare.net/thumbs/99/7b/997bb3be2048ed6c48939d0c5b080944.jpg (http://jpegshare.net/99/7b/997bb3be2048ed6c48939d0c5b080944.png.html)

P.S.
The installation of the plugin is very uncomfortable for car use... Why not use AutoIt to replace strings in files (https://www.autoitscript.com/autoit3/docs/functions/StringReplace.htm) of the skin, or other scripting language to perform these functions ???

[seriousstas]

duzzy
По идее - плагин должен читать то-же , что и BlueSoleil 10 .
Попробуй вначале выполни поиск функций ( ПКМ по устройству ) и прочитай книгу и СМС в самом BlueSoleil (там-же по ПКМ)
через "Обновить" :
http://rgho.st/7ztwcdmT8.view

[seriousstas]

pierrotm777
I have no issue with a latin letters! Why issue with the russian letters?
Seeking if I press shift. Now the keyboard is seeking only small letters.
please correct it!

Аfter removal of
C: \ Program Files (x86) \ TipTop software \ iCar DS \ Extentions \ MobilePhone \ MobilePhone.xml
works SMS reading, but if I read all SMS through - the icon blinks anyway
Need Installer, which first removes the old [B] MobilePhone.xml [/ B] and
making all records for
skin.ini
setting.ini
ExecTBL.ini
automatically

[pierrotm777]

pierrotm777

Seeking if I press shift. Now the keyboard is seeking only small letters.
please correct it!

Аfter removal of
C: \ Program Files (x86) \ TipTop software \ iCar DS \ Extentions \ MobilePhone \ MobilePhone.xml
works SMS reading, but if I read all SMS through - the icon blinks anyway
Need Installer, which first removes the old [B] MobilePhone.xml [/ B] and
making all records for
skin.ini
setting.ini
ExecTBL.ini
automatically
Actually, if the version is different, the xml file is deleted after the install.
It's would be better than Lexx09 add this options for MOBILEPHONE definitively into these 3 files !

duzzy,
I have forgotten to uncomment the line that follow into the SKIPTO_OSK.skin screen:
Script,OnScreenStart,SETVAR;KBLAYOUT;0

About the datetime error , can you send me you vcf file please by PM ?
Certainly a different date time format ?
What phone do you use and what OS?

[seriousstas]

PhoneStartupDelay !
Where is this setting?

Did you have try the keyboard and the hold feature letter for search a up case letter

Search Keyboard on hold - works without problems.
The first, which looking at the first letter (if select russian) - are still not working with uppercase letters.
Must press SHIFT - the keyboard letters are uppercase and then search for work.
With Latin alphabet - everything works in all registers..

Bersenev and Lexx09 the list of all iCarDS commands.
Repeat questions - they often respond not immediately.
Mail :
bersenev_s@mail.ru

[pierrotm777]

Where is this setting?
Delete the xml file and you will see at the end this new option !
Stay value from 5 to 2 minimum.
Default is 5.


Search Keyboard on hold - works without problems.
The first, which looking at the first letter (if select russian) - are still not working with uppercase letters.
Must press SHIFT - the keyboard letters are uppercase and then search for work.
With Latin alphabet - everything works in all registers..
Good news.


Repeat questions - they often respond not immediately.
Mail :
bersenev_s@mail.ru
Main sent

[seriousstas]

Good news.
You did not watch the video? The first keyboard does not work!
see PM 28.07.2016, 23:32
are still not working with uppercase letters.

[duzzy]

pierrotm777

Russian translation of installer (https://yadi.sk/i/pdTqpytttzvTS).

[seriousstas]

pierrotm777

Russian translation of installer (https://yadi.sk/i/hLNSX-hHtzfsT).

Посмотри, там что-то с кодировкой :
Óñòàíîâêà äîïîëíåíèé (Ğóññêîãî ÿçûêà è ıêğàíà íàñòğîåê) â ............

[duzzy]

seriousstas

:) Ну что дали то и назад вернул)))... сейчас гляну...

-------------------------

обновил ссылку вот (http://pccar.ru/showpost.php?p=366608&postcount=140)... была кодировка ansi

[pierrotm777]

Посмотри, там что-то с кодировкой :
Óñòàíîâêà äîïîëíåíèé (Ğóññêîãî ÿçûêà è ıêğàíà íàñòğîåê) â ............
I use notepad++ for edit the files !
The code is:
en.InstallChameleon=Install the Sample Skin into
fr.InstallChameleon=Installer les écrans dans
de.InstallChameleon=Installieren Sie die Beispiel Haut in
fi.InstallChameleon=Asenna Sample Skin osaksi
it.InstallChameleon=Installare AddOns ( di lingua francese e un altro impostazioni dello schermo ) in
pl.InstallChameleon=Zainstalować skórki próbki do
pt_br.InstallChameleon=Instale a pele da amostra em
ru.InstallChameleon=Установите образец кожи в

en.InstallAddOnsChameleon=Install AddOns(French Language and another settings screen) into
fr.InstallAddOnsChameleon=Installer les ajouts(Language français et écrans config. supp.) dans
de.InstallAddOnsChameleon=Installieren Sie AddOns ( Französisch Sprache und weitere Einstellungen Bildschirm ) in
fi.InstallAddOnsChameleon=Asenna AddOns ( Ranskan kieli ja toinen asetusruutu ) osaksi
it.InstallAddOnsChameleon=Installare AddOns ( di lingua francese e un altro impostazioni dello schermo ) in
pl.InstallAddOnsChameleon=Instalowanie AddOns ( język francuski i kolejne ustawienia ekranu ) do
pt_br.InstallAddOnsChameleon=Instalar complementos ( língua francesa e outras definições do ecrã ) para
ru.InstallAddOnsChameleon=Установите добавления ( французский язык и другие настройки экрана) в

en.UpdateChameleonIniFiles=Install AddOns(setting.ini, skin.ini and ExecTBL.ini) into
fr.UpdateChameleonIniFiles=Mise à jour fichiers .ini(setting.ini, skin.ini and ExecTBL.ini) dans
de.UpdateChameleonIniFiles=Installieren Sie AddOns (setting.ini, skin.ini and ExecTBL.ini) in
fi.UpdateChameleonIniFiles=Asenna AddOns (setting.ini, skin.ini and ExecTBL.ini) osaksi
it.UpdateChameleonIniFiles=Installare AddOns (setting.ini, skin.ini and ExecTBL.ini) in
pl.UpdateChameleonIniFiles=Instalowanie AddOns (setting.ini, skin.ini and ExecTBL.ini) do
pt_br.UpdateChameleonIniFiles=Instalar complementos (setting.ini, skin.ini и ExecTBL.ini) para
ru.UpdateChameleonIniFiles=Обновление файлов .ini(setting.ini, skin.ini and ExecTBL.ini) в

en.FullInstall=Full installation
fr.FullInstall=Installation complète
de.FullInstall=Volledige installatie
fi.FullInstall=Täysi asennus
it.FullInstall=Installazione completa
pl.FullInstall=Pełna instalacja
pt_br.FullInstall=Instalação completa
ru.FullInstall=Полная установка
;************************************************* ********
en.SkinOnly=Install the Sample Skin into
fr.SkinOnly=Installer les écrans dans
de.SkinOnly=Installieren Sie die Beispiel Haut in
fi.SkinOnly=Asenna Sample Skin osaksi
it.SkinOnly=Installare AddOns in
pl.SkinOnly=Zainstalować skórki próbki do
pt_br.SkinOnly=Instale a pele da amostra em
ru.SkinOnly=Установите образец кожи в

en.AddOnOnly=Install AddOns (French Language and another settings screen) into
fr.AddOnOnly=Installer les ajouts (Language français et écrans config. supp.) dans
de.AddOnOnly=Installieren Sie AddOns ( Französisch Sprache und weitere Einstellungen Bildschirm ) in
fi.AddOnOnly=Asenna AddOns ( Ranskan kieli ja toinen asetusruutu ) osaksi
it.AddOnOnly=Installare AddOns ( di lingua francese e un altro impostazioni dello schermo ) in
pl.AddOnOnly=Instalowanie AddOns ( język francuski i kolejne ustawienia ekranu ) do
pt_br.AddOnOnly=Instalar complementos ( língua francesa e outras definições do ecrã ) para
ru.AddOnOnly=Установите добавления ( французский язык и другие настройки экрана) в

en.EditSettingsOnly=Update .ini files (setting.ini, skin.ini and ExecTBL.ini) into
fr.EditSettingsOnly=Mise à jour fichiers .ini(setting.ini, skin.ini et ExecTBL.ini) dans
de.EditSettingsOnly=Update bestanden .ini (setting.ini, skin.ini en ExecTBL.ini) in
fi.EditSettingsOnly=Päivitys tiedostoja .ini (setting.ini, skin.ini ja ExecTBL.ini) osaksi
it.EditSettingsOnly=I file di aggiornamento .ini (setting.ini, skin.ini e ExecTBL.ini) in
pl.EditSettingsOnly=Aktualizacja plików .ini (setting.ini, skin.ini i ExecTBL.ini) w
pt_br.EditSettingsOnly=Arquivos de atualização .ini (setting.ini, skin.ini и ExecTBL.ini) para
ru.EditSettingsOnly=Обновление файлов .ini(setting.ini, skin.ini и ExecTBL.ini) в

[seriousstas]

pierrotm777
Download Russian translation from duzzy:
http://pccar.ru/showpost.php?p=366617&postcount=142

[seriousstas]

pierrotm777
C:\Program Files (x86)\TipTop software\iCarDS\Extentions\MobilePhone\MobilePhone .xml
We need changed from 5 to 2 ?
<PhoneStartupDelay>2</PhoneStartupDelay>
Сhanged - now loading in 4 seconds

[seriousstas]

1 Please do the work, or remove this keyboard:
Does not work:
http://rgho.st/6BzxFggXK/thumb.png (http://rgho.st/6BzxFggXK.view)

Works (if selected caps ):
http://rgho.st/8nYDWfBvt/thumb.png (http://rgho.st/8nYDWfBvt.view)

2 Delete the message from the dial string :

http://rgho.st/8RWgMNnQV/thumb.png (http://rgho.st/8RWgMNnQV.view)

3 If connect the first phone - the second, too, wrote in a status - "Connected" in the settings.
Why?

4 Make the transition from the settings directly in the phone menu after the first connection.

5 By SMS:
Reading starts after unins000.exe previous versions and complete installation.
Do auto-scan SMS.
Turn off the endless blinking SMS icon.

Russian :
1 Пожалуйста сделай рабочей или удали эту клавиатуру
2 Убери эти сообщения из строки набора номера
3 Если подключить первый телефон - второй в статусе тоже пишет - "Подключен" в настройках
Почему ?
4 Сделай переход из настроек сразу в меню телефона после первого подключения
5 По СМС :
Чтение начинает работать после уделения предидущей версии и полной установки новой .
Сделай авто-сканирование СМС
Отключи бесконечное моргание иконки СМС

[seriousstas]

ВСЕМ ! Просьба проверить работу плагина от уважаемого pierrotm777 :

Установка (телефон должен быть сопряжен с BlueSoleil) :
1. Удалить предидущую версию и удалить папку (если была ранее установлена):
C:\Program Files (x86)\TipTop software\iCar DS\Extentions\MobilePhone\
Установить Version 1.5.3 из шапки темы (полная установка) .
2. Зайти в "Телефон" - Нажать "Обновить Устройства"
Выбрать и "Применить"
3. Обновить (кнопкой) базу контактов (телефон может попросить разрешения)
Перезапустить Икар проверить связь .
4. Зайти в СМС - проверить чтение - нажав на кнопку "Msg Read "(дождаться сообщения об успешном прочтении базы)

Отписаться :)

[pierrotm777]

seriousstas,
I know why you have the mac address issue into the mobilephone dial box !
That can happen only if you have no MobilePhone_PB.txt file !
Some time this file is deleted, so, when we return from setting to the main screen the ONCLCLICK see nothing and don't update the dial box !
If you update your phone book, you will never see this issue !

I must to find a solution for this error !

If i undertsand, when you use the key board with the upper case, you can find a lower case or upper case letter ?

[pierrotm777]

seriousstas,
I have found a very simple solution about the mac address issue!
Into the MOBILEPHONE_SETTINGS.skins screen, add the line:
Script,OnScreenEnd,MOBILEPHONE_CLEAR

[seriousstas]

I have update the keyboard (bad code for number 0 to 9)
and add these two lines:

Working . Add one more button to switch the language ENG / RUS please

[seriousstas]

pierrotm777
Message reader works very badly - only the first start after pairing, or after remove MobilePhone.xml .
Through BlueSoleil read without problems

[Winlin]

А чем этот плагин лучше? Есть возможность ТОЛЬКО принять звонок через ИКАР , а разговаривать по телефону? (как в центрифуге )

[pierrotm777]

А чем этот плагин лучше? Есть возможность ТОЛЬКО принять звонок через ИКАР , а разговаривать по телефону? (как в центрифуге )
Yes, it's possible. See the first post !

[sirota]

А чем этот плагин лучше? Есть возможность ТОЛЬКО принять звонок через ИКАР , а разговаривать по телефону? (как в центрифуге )

:shok:
Это как?...по подробней можно?

[pierrotm777]

Working . Add one more button to switch the language ENG / RUS please

It's automatic . We can't do that because the the key board is defined outside icards.

[Winlin]

:shok:
Это как?...по подробней можно?

Это так раздается звонок в оболочке ты можешь разговаривать по громкой связи, а можешь нажать кнопку и продолжить разговор по телефону, а не по громкой связи.

я грубо говоря боюсь пропустить звонок, а сам разговор мне удобнее вести через телефон.

[seriousstas]

Winlin
sirota
нажать кнопку и продолжить разговор по телефону
Можно - и переключать туда-сюда можно .
Установка теперь автоматом :
http://pccar.ru/showpost.php?p=366803&postcount=149

[seriousstas]

It's automatic . We can't do that because the the key board is defined outside icards.

It is possible through AHK (https://autohotkey.com/) (and attach to the button) (RUS/ENG):
SetFormat, Integer, H
Locale1=0x4090409 ; Английский (американский).
Locale2=0x4190419 ; Русский.
WinGet, WinID,, A
ThreadID:=DllCall("GetWindowThreadProcessId", "Int", WinID, "Int", "0")
InputLocaleID:=DllCall("GetKeyboardLayout", "Int", ThreadID)
if(InputLocaleID=Locale1)
SendMessage, 0x50,, % Locale2,, A
else if(InputLocaleID=Locale2)
SendMessage, 0x50,, % Locale1,, A
Exit

or Autoit :
https://www.autoitscript.com/autoit3/docs/libfunctions/_WinAPI_SetKeyboardLayout.htm

[seriousstas]

Little screens update that solve the message into the dial box
Flashed and deleted messages but not always. MAC address stays in the window.

[Winlin]

Winlin
sirota

Можно - и переключать туда-сюда можно .
Установка теперь автоматом :
http://pccar.ru/showpost.php?p=366803&postcount=149

Поставил. На входящую СМСку реакции никакой. А еще не понял по какому принципу сортируется телефонная книга. (что то все в разнобой)
Со звуком тоже беда: при входящем или исходящем звонке, регулировка звука улетает на максимум, а при окончании звонка предыдущий источник (музыка) орет на полную.

[pierrotm777]

Поставил. На входящую СМСку реакции никакой. А еще не понял по какому принципу сортируется телефонная книга. (что то все в разнобой)
Со звуком тоже беда: при входящем или исходящем звонке, регулировка звука улетает на максимум, а при окончании звонка предыдущий источник (музыка) орет на полную.
It's why i need to know the command accepted by iCarDS .
SETVOL command exist for RideRunner but not for iCarDS!

Into the file 'MobilePhone Skin Commands.txt', you can see all event usable !
ONMOBILEPHONECONNECTED Raises an event when the phone is connected.
ONMOBILEPHONEDISCONNECTED Raises an event when the phone is disconnected.
ONMOBILEPHONERINGING Raises an event when an incomming call is detected.
ONMOBILEPHONEINCALL Raises an event when you first answer a call
ONMOBILEPHONEHUNGUP Raises an event when quit a call
ONMOBILEPHONENETAVAIL Raises an event when first connect to a network.
ONMOBILEPHONENETUNAVAIL Raises an event when first disconnect from a network.
ONMOBILEPHONEBATTERYFULLCHARGE Raises an event when the battery is 100%
ONMOBILEPHONEEMERGENCY Raises an event when the phone number = 911 (US) or 112 (EU) (define into the .xml file)
ONMOBILEPHONEVOICEON Raises an event when voice activation is on
ONMOBILEPHONEVOICEOFF Raises an event when voice activation is off
ONMOBILEPHONEEXTPOWERON Raises an event when an external power is connected to the phone
ONMOBILEPHONEEXTPOWEROFF Raises an event when the phone use it's own battery
ONMOBILEPHONE1FOUND Raises an event when the phone 1 is found.
ONMOBILEPHONE2FOUND Raises an event when the phone 2 is found.

ONMOBILEPHONESPEECHLOAD Raises an event when the phone speech recognition is loaded
ONMOBILEPHONESPEECHUNLOAD Raises an event when the phone speech recognition is unloaded
ONMOBILEPHONESPEECHHELP Raises an event when the phone speech recognition ask the speech help
ONMOBILEPHONESPEECHSUPP1 Raises an event when the phone speech recognition ask the speech supplement 1
ONMOBILEPHONESPEECHSUPP2 Raises an event when the phone speech recognition ask the speech supplement 2
ONMOBILEPHONESPEECHSUPP3 Raises an event when the phone speech recognition ask the speech supplement 3

ONMOBILEPHONESMSISSEND Raises an event when the phone send a SMS message
ONMOBILEPHONEMAPISRECEIVED Raises an event when the phone recieve a new SMS message

It's possible to save the old volume value when the phone ringing !
Actually, for iCarDS, the code do that:
SETVARBYCODE;OLDVOLUME;VOLUME||SETVOL;MASTER;100|| PAUSE||SETVOL;MASTER;100||*ONMOBILEPHONERINGING

And after the hangup, i try to resume the old volume value:
SETVOL;MASTER;$OLDVOLUME$||RESUME||DVBMUTE;0||*ONM OBILEPHONEHUNGUP

But i already said in an other thread, iCarDS return nothing for the LABEL VOLUME and i don't understand why!
But i can play an album without issue !

This is the alone thread where i have some response to my problems !
It's not very sympathetic !!!

Into the file ExecTBL.ini, under the line 'Сохранение пресетов микшера для телефона',
we should can to adapt the lines that follow ?
/ Входящий звонок
"ONINCOMMINGCALLSTART","ByVar;IsPhoneTalk;INCOMMINGCALLSTARTif"
"INCOMMINGCALLSTARTif","Menu;call_in.skin||StartPhoneCall"

"ONINCOMMINGCALLEND","ByVar;IsPhoneTalk;<<INCOMMINGCALLENDTif"
"INCOMMINGCALLENDTif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

/ Исходящий звонок
"ONINOUTGOINGCALLSTART","ByVar;IsPhoneTalk;INOUTGOINGCALLSTARTif"
"INOUTGOINGCALLSTARTif","Menu;call_out.skin||StartPhoneCall"

"ONINOUTGOINGCALLEND","ByVar;IsPhoneTalk;<<INOUTGOINGCALLENDif"
"INOUTGOINGCALLENDif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

"StartPhoneCall","SetVar;IsPhoneTalk;1||ByVar;IsPausedMedia;<<CF_Pause||SaveMixerPreset_Media||LoadMixerPreset;P hone||volperc+;$vol_from_speed_full$"
"EndPhoneCall","SaveMixerPreset_Phone||LoadMixerPreset_Media||ByVa r;IsPausedMedia;<<CF_Resume||SetVar;IsPhoneTalk;0"

"SaveMixerPreset_Media","ByVar;MixerPresetMode;SaveMixerPreset_Media_Manual<<SaveMixerPreset_Media_Manual<<SaveMixerPreset_Media_Auto"
"SaveMixerPreset_Media_Auto","volperc-;$vol_from_speed_full$||SaveMixerPreset;$Media_s$"
"SaveMixerPreset_Media_Manual","volperc-;$vol_from_speed_full$||SaveMixerPreset;tmp"

"SaveMixerPreset_Phone","ByVar;MixerPresetMode;<<<<SaveMixerPreset_Phone_Auto"
"SaveMixerPreset_Phone_Auto","volperc-;$vol_from_speed_full$||SaveMixerPreset;Phone"

"LoadMixerPreset_Media","ByVar;MixerPresetMode;LoadMixerPreset_Media_Manual<<LoadMixerPreset_Media_Manual<<LoadMixerPreset_Media_Auto"
"LoadMixerPreset_Media_Auto","LoadMixerPreset;$Media_s$||volperc+;$vol_from_spee d_full$"
"LoadMixerPreset_Media_Manual","LoadMixerPreset;tmp||volperc+;$vol_from_speed_full $"


Or just add that into the file ExecTBL.ini ?
"ONMOBILEPHONERINGING","ByVar;IsPhoneTalk;INCOMMINGCALLSTARTif"
"INCOMMINGCALLSTARTif","StartPhoneCall"

"ONMOBILEPHONEHUNGUP","ByVar;IsPhoneTalk;<<INCOMMINGCALLENDTif"
"INCOMMINGCALLENDTif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"


If that solve the volume issue, i can add it into the installer !!!

[seriousstas]

Winlin
На входящую СМС реакции никакой.
А чтение как ?(кстати здесь можно и отправлять СМС .. )
Я если закрою-открою Икар - читать перестает . Также если просто повторно поробовать просканировать СМС - уже нет реакции на кнопку MSG READ

Со звуком тоже беда: при входящем или исходящем звонке, регулировка звука улетает на максимум, а при окончании звонка предыдущий источник (музыка) орет на полную.
Подтверждаю - звук на 100 % всегда . Не запоминает позицию .
По какому принципу сортируется телефонная книга. (что то все в разнобой)
Уже говорил об этом pierrotm777

[Winlin]

кстати звонка через громкую связь, как это было в родном плагине икара, тоже нет. просто звонит телефон, а текущий плагин просто глушит звук.

[seriousstas]

кстати звонка через громкую связь, как это было в родном плагине икара, тоже нет. просто звонит телефон, а текущий плагин просто глушит звук.

Что значит "Громкую" ? . Звук собеседника выводится на динамики без проблем .

[Winlin]

Нет я про звук "звонка". Звенит ТОЛЬКО телефон. В динамиках авто не проигрывается мелодия вызова.

[seriousstas]

Звенит ТОЛЬКО телефон
Winlin
pierrotm777
Точно из iCarDS - звука нет при входящем звонке.
Еще баг :
Если из MobilePhone Plugin я набираю 466 , ложу трубку,
а затем из телефона набираю например 0972222222, то предложит сохранить
снова 466 .Думаю нужно вообще отключить это окно :
http://rgho.st/755mBR2yR/thumb.png (http://rgho.st/755mBR2yR.view)

[pierrotm777]

Winlin
pierrotm777
Точно из iCarDS - звука нет при входящем звонке.
Еще баг :
Если из MobilePhone Plugin я набираю 466 , ложу трубку,
а затем из телефона набираю например 0972222222, то предложит сохранить
снова 466 .Думаю нужно вообще отключить это окно :
http://rgho.st/755mBR2yR/thumb.png (http://rgho.st/755mBR2yR.view)

I shall see that again tomorrow.

About the popup , check your xml file <PhoneNoAddContact>false</PhoneNoAddContact> and set to true .

I have build a new version of my old SkinToolDS that run now very well and help me a lot of for work on iCarDS (Full .NET vresion) !

[seriousstas]

About the popup , check your xml file <PhoneNoAddContact>false</PhoneNoAddContact> and set to true .

If, in MobilePhone Plugin I dial 466 & put handset
- then dial through a mobile phone : example 112, then (in popup (http://rgho.st/755mBR2yR/thumb.png)) prompts save
466 again (but should 112).

<PhoneNoAddContact>true</PhoneNoAddContact> - does not help

[pierrotm777]

I have added the 'No Add Contact' and 'No Sms Popup' into the second setting's screen !

[pierrotm777]

If, in MobilePhone Plugin I dial 466 & put handset
- then dial through a mobile phone : example 112, then (in popup (http://rgho.st/755mBR2yR/thumb.png)) prompts save
466 again (but should 112).

<PhoneNoAddContact>true</PhoneNoAddContact> - does not help

You use the green or blue button for call the number 466 ?

[pierrotm777]

Нет я про звук "звонка". Звенит ТОЛЬКО телефон. В динамиках авто не проигрывается мелодия вызова.
The ringing is only by the phone , not by the speaker's car .

Sorry !
But it's possible to add that i think !
by example, you can add into your ExecTBL.INI file:
"ONMOBILEPHONERINGING","PlaySound1;PlaySound1;$SkinPath$\Sounds\YourSong.w av"

Can can add what you want before the PlaySound1, by example PAUSE|| !!!

Some songs exist by example here (http://soundbible.com/tags-phone-ring.html)

It's also possible to have a sentence like:
"ONMOBILEPHONERINGING","SAY;You have a new call !!!"

or:
"ONMOBILEPHONERINGING","SETVARBYCODE;USER;MOBILEPHONE_CALLERNAME||SAY;You have a new call from $USER$ !!!"

It's also possible to add this line into the installer!
We just need to define what sound use !

[seriousstas]

You use the green or blue button for call the number 466 ?
No - the usual input & press green. It does not matter which number (466 or 097-XXX-XX-XX).

[pierrotm777]

No - the usual input & press green. It does not matter which number (466 or 097-XXX-XX-XX).
Can you send me your xml file and a video of this issue please ?

[pierrotm777]

Поставил. На входящую СМСку реакции никакой. А еще не понял по какому принципу сортируется телефонная книга. (что то все в разнобой)
Со звуком тоже беда: при входящем или исходящем звонке, регулировка звука улетает на максимум, а при окончании звонка предыдущий источник (музыка) орет на полную.

If you hold this button, you can sort your list !

[seriousstas]

I have added the 'No Add Contact' and 'No Sms Popup' into the second setting's screen !

It reversed the two values

[seriousstas]

Something is now with the English keyboard :
http://rgho.st/6qYzVNxmx/thumb.png (http://rgho.st/6qYzVNxmx.view)

[seriousstas]

Read SMS now works through again.
The first restart iCards - no reaction on the button - the second - SMS reading.
And so in a circle

[pierrotm777]

Read SMS now works through again.
The first restart iCards - no reaction on the button - the second - SMS reading.
And so in a circle

The good method for read sms is to wait 30s and when indicator is blinking, click on read button. Your use is bad

[seriousstas]

You use the green or blue button for call the number 466 ?

Always 466, although from mobile dial different numbers :
VIDEO (https://youtu.be/INV9iHgMVQw)

[seriousstas]

good method for read sms is to wait 30s
I'm waiting for a minute or more - SMS can not be read at all (or after a few restarts):
VIDEO 2 (https://youtu.be/fyIKqgRmPCs)
In the video, I reran six times IcarDS - Only twice read messages !

[pierrotm777]

I'm waiting for a minute or more - SMS can not be read at all (or after a few restarts):
VIDEO 2 (https://youtu.be/fyIKqgRmPCs)
In the video, I reran six times IcarDS - Only twice read messages !
About the sms, i think have found why you have this issue !

The code use two command but when the second command is used the first have not enough time for its work !
So, i have modified and simplified this part of code for a easier use !
The second command is send only after the first will be finished !
No the code is running very well for Unread or All sms !
We have now no popup but just an info line into the sms screens.

[pierrotm777]

Always 466, although from mobile dial different numbers :
VIDEO (https://youtu.be/INV9iHgMVQw)
Humm, i understand now better !
You don't like that ? (it's a joke)

I see that !
I suppose your PhoneNoAddContact settings is set to false ? <PhoneNoAddContact>false</PhoneNoAddContact>

[pierrotm777]

Always 466, although from mobile dial different numbers :
VIDEO (https://youtu.be/INV9iHgMVQw)
I have not this issue !
For my test, i use the number 123 that call my vocal message box !
I have no popup !
Do you have a timer that call again and again this popup or an IDLE into your exectbl.ini file ?

I send you my exectbl.ini file !
Can you do a test with this file please ?

[pierrotm777]

Something is now with the English keyboard :
http://rgho.st/6qYzVNxmx/thumb.png (http://rgho.st/6qYzVNxmx.view)

The keyboard issue on the OnScreenStart command into the SKIPTO_OSK screen.
the command is:
Script,OnScreenStart,SETVARBYCODE;LANG;LangName||S HIFTLOCK||if;strcomp($LANG$;RU);{SetVar;KBLAYOUT;1 };{SetVar;KBLAYOUT;0}

I check the label LangName that return RU if a russian keyboard is define in windows.
So i try to check if LANG = RU !!!
If yes, KBLAYOUT=1
If no, KBLAOUT = 0

But this line don't run and i don't know why !

Need help please !!! :pleasantry::pleasantry::pleasantry:

[Winlin]

В общем пока не решится проблема с уровнями громкости пользоваться не возможно.
Принял звонок, и дальше надо бируши резко вставить, чтобы не оглохнуть от включившейся музыки. ;)

Может пока не найдено решение проблемы, при звонке МАСТЕР звука не 100 ставить, а 10 например.

[duzzy]

pierrotm777

What you will do with 100% volume on call?

You have already found a solution... Why not apply in your plugin ?

/ Входящий звонок(Incoming call)
"ONINCOMMINGCALLSTART","ByVar;IsPhoneTalk;INCOMMINGCALLSTARTif"
"INCOMMINGCALLSTARTif","Menu;call_in.skin||StartPhoneCall"

"ONINCOMMINGCALLEND","ByVar;IsPhoneTalk;<<INCOMMINGCALLENDTif"
"INCOMMINGCALLENDTif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

/ Исходящий звонок(Outgoing call)
"ONINOUTGOINGCALLSTART","ByVar;IsPhoneTalk;INOUTGOINGCALLSTARTif"
"INOUTGOINGCALLSTARTif","Menu;call_out.skin||StartPhoneCall"

"ONINOUTGOINGCALLEND","ByVar;IsPhoneTalk;<<INOUTGOINGCALLENDif"
"INOUTGOINGCALLENDif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

"StartPhoneCall","SetVar;IsPhoneTalk;1||ByVar;IsPausedMedia;<<CF_Pause||SaveMixerPreset_Media||LoadMixerPreset;P hone||volperc+;$vol_from_speed_full$"
"EndPhoneCall","SaveMixerPreset_Phone||LoadMixerPreset_Media||ByVa r;IsPausedMedia;<<CF_Resume||SetVar;IsPhoneTalk;0"

"SaveMixerPreset_Media","ByVar;MixerPresetMode;SaveMixerPreset_Media_Manual<<SaveMixerPreset_Media_Manual<<SaveMixerPreset_Media_Auto"
"SaveMixerPreset_Media_Auto","volperc-;$vol_from_speed_full$||SaveMixerPreset;$Media_s$"
"SaveMixerPreset_Media_Manual","volperc-;$vol_from_speed_full$||SaveMixerPreset;tmp"

"SaveMixerPreset_Phone","ByVar;MixerPresetMode;<<<<SaveMixerPreset_Phone_Auto"
"SaveMixerPreset_Phone_Auto","volperc-;$vol_from_speed_full$||SaveMixerPreset;Phone"

"LoadMixerPreset_Media","ByVar;MixerPresetMode;LoadMixerPreset_Media_Manual<<LoadMixerPreset_Media_Manual<<LoadMixerPreset_Media_Auto"
"LoadMixerPreset_Media_Auto","LoadMixerPreset;$Media_s$||volperc+;$vol_from_spee d_full$"
"LoadMixerPreset_Media_Manual","LoadMixerPreset;tmp||volperc+;$vol_from_speed_full $"

I found that MASTER volume set by this command...
--- "SETVOL;MASTER;0" --- 0%
--- "SETVOL;MASTER;100" --- 100%

Thanks to your SkinTool.:smile2:
(an updated version of the SkinTool would be very good:wink2:)

---------------------------------------------------------------------------------

About lang change in osk...

you can use AHK script from seriousstas... download 7z archive (https://yadi.sk/d/hop_hYdKuEHUn) with precompiled AHK script.

an example of a button in mini osk keyboard with AHK script...

B,0,200,130,50,"RUNQ;$SKINPATH$SCRIPTS\Lang_change.exe",""

------------------------------------------------------------
skin command from osk and osk2 lang change...

osk2
http://jpegshare.net/thumbs/62/3e/623e816b26e31358ee7f773e188bcffa.jpg (http://jpegshare.net/62/3e/623e816b26e31358ee7f773e188bcffa.png.html)

B,0,200,130,50,"SENDKEY;$LangToggleSet$",""

OSK
http://jpegshare.net/thumbs/30/dd/30dd3a3f13fbe82062482d827bcca3ee.jpg (http://jpegshare.net/30/dd/30dd3a3f13fbe82062482d827bcca3ee.png.html)

B,567,510,70,90,"LangToggle",""
...

[Winlin]

А в каком файле есть эта запись "SETVOL;MASTER"

зарядил поиск по диску. Не могу найти.

[duzzy]

Winlin

Записи нет в файлах :) как и документации по Икару... что очень печально...
Разработчик мог бы и приложить хотя бы один файлик с командами Икара, и простенькими пояснениями... софтина то платная...

Я брал команду из RideRunner-а и опытным путем выяснил через SkinTool (http://pccar.ru/showthread.php?t=14353) как менять громкость в процентном соотношении.

[Winlin]

Просто автор плагина привел команды , как он делает. Я и хотел изменить 100 на 10 , скажем, но не нашел где.

[duzzy]

Winlin

На сколько я понимаю, похоже что нужно вносить правки состояний плагина в ExecTBL.
Т.е.
звоним --- делаем это
положили трубку --- делаем что то еще

Пусть автор сам допиливает плагин до рабочего состояния, все ошибки и проблемы уже указаны.

[Winlin]

но ведь где то он на 100% мастер звука двигает.

[pierrotm777]

Thanks for all help guys !

I see that as soon as possible !

[duzzy]

pierrotm777

Try this link :smile2:... download (http://sendfile.su/1257765)
...

[sirota]

duzzy

Вы матом на ихнем не ругайтесь, а по русски иногда пишите :rofl: ....пробовать или пока все еще мозговой штурм?

[duzzy]

sirota

:) Попробовать можно, но дома на виртуалке)))... там пока еще много чего допиливать нужно.

[sirota]

sirota

:) Попробовать можно, но дома на виртуалке)))... там пока еще много чего допиливать нужно.

Спасибо, что предупредил, а то чуть в авто не понес...а могло бы БАБАХ...нуть :rolleyes2:

[duzzy]

sirota

Пожалуйста !
Понимаешь тут такое дело, по уму надо конечно в авто ставить и пробовать и тестировать, но так как автору плагина никто из разрабов Икара не помогает он делает все сам... отсюда и заморчки(со звуком, переключением клавы на rus/eng и др. проблемами)

[seriousstas]

sirota
Мог-бы :)

pierrotm777
I send you my exectbl.ini file !
Can you do a test with this file please ?
I Tried - without change



After uninstall a plugin (through the control panel) :( :

[duzzy]

seriousstas

Привет ! :)

У нас Ргост в блоке(картинок не видно))))... заливай картинки http://jpegshare.net/

[seriousstas]

duzzy
Здарова! Ок
Пробовал удалять ? Похоже нужно больше *.ini -шек делать бекап при этом и восстанавливать при удалении.
Сейчас тестовый Икар - умер .

[duzzy]

seriousstas

:)

Да уже два тестовых удалил)))... нужен нормальный беэкап, судя по всему видимо что то неправильно восстанавливается при деинсталляции... видимо скрипт косячный.

Я пробовал Автоитом менять exectbl и бэкапить, просто для теста свои изменения вносил, исправленные экраны, правки в файлах скинов(не для этого плагина) вроде все работает без проблем.

Возможно лучшим вариантом бэкапа было бы простое копирование тех файлов в которые вносятся изменения, например в директорию плагина в папку Orig_skin_files, а при деинсталляции возврат этих файлов на место(это просто мысли вслух)...

------------------------------

В Икаре в папке скина(C:\Users\Имя Пользователя\Documents\iCarDS\skins\Chameleon) есть такая утилита SaveSkinSetting.exe...
Если ее развернуть то там можно увидеть как происходит бэкап при использовании Автоита...
#Region
#AutoIt3Wrapper_Icon=C:\Program Files (x86)\AutoIt3\Icons\MyAutoIt3_Blue.ico
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_UseUpx=y
#EndRegion
Opt("TrayIconHide", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_command.ini", @ScriptDir & "\DuinoKey\duino_key_command.chs", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_info.ini", @ScriptDir & "\DuinoKey\duino_key_info.chs", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_list.txt", @ScriptDir & "\DuinoKey\duino_key_list.chs", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_res_key.txt", @ScriptDir & "\DuinoKey\duino_res_key.chs", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_send_commands.ini", @ScriptDir & "\DuinoKey\duino_send_commands.chs", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_temp_sensors.ini", @ScriptDir & "\DuinoKey\duino_temp_sensors.chs", 1)
FileCopy(@ScriptDir & "\GPSExec\0\poi.ini", @ScriptDir & "\GPSExec\0\poi.chs", 1)
FileCopy(@ScriptDir & "\GPSExec\1\poi.ini", @ScriptDir & "\GPSExec\1\poi.chs", 1)
FileCopy(@ScriptDir & "\Plugins\iCarNotes\iCarNotes.ini", @ScriptDir & "\Plugins\iCarNotes\iCarNotes.chs", 1)
FileCopy(@ScriptDir & "\Plugins\iCarVoiceCommander\voice_commands.ini", @ScriptDir & "\Plugins\iCarVoiceCommander\voice_commands.chs", 1)
FileCopy(@ScriptDir & "\Plugins\iCarWiFi\iCarWiFi.ini", @ScriptDir & "\Plugins\iCarWiFi\iCarWiFi.chs", 1)
FileCopy(@ScriptDir & "\AMG.ini", @ScriptDir & "\AMG.chs", 1)
FileCopy(@ScriptDir & "\apps.ini", @ScriptDir & "\apps.chs", 1)
FileCopy(@ScriptDir & "\autovol.ini", @ScriptDir & "\autovol.chs", 1)
FileCopy(@ScriptDir & "\BlueStacks.ini", @ScriptDir & "\BlueStacks.chs", 1)
FileCopy(@ScriptDir & "\browser_menu_command.ini", @ScriptDir & "\browser_menu_command.chs", 1)
FileCopy(@ScriptDir & "\buttons.ini", @ScriptDir & "\buttons.chs", 1)
FileCopy(@ScriptDir & "\buttons_preset.ini", @ScriptDir & "\buttons_preset.chs", 1)
FileCopy(@ScriptDir & "\buttons_screens.ini", @ScriptDir & "\buttons_screens.chs", 1)
FileCopy(@ScriptDir & "\cd_changer.ini", @ScriptDir & "\cd_changer.chs", 1)
FileCopy(@ScriptDir & "\contact_fav.ini", @ScriptDir & "\contact_fav.chs", 1)
FileCopy(@ScriptDir & "\dinamic_button.ini", @ScriptDir & "\dinamic_button.chs", 1)
FileCopy(@ScriptDir & "\dinamic_label.ini", @ScriptDir & "\dinamic_label.chs", 1)
FileCopy(@ScriptDir & "\duino.ini", @ScriptDir & "\duino.chs", 1)
FileCopy(@ScriptDir & "\general.ini", @ScriptDir & "\general.chs", 1)
FileCopy(@ScriptDir & "\hotkey.ini", @ScriptDir & "\hotkey.chs", 1)
FileCopy(@ScriptDir & "\Initialize.ini", @ScriptDir & "\Initialize.chs", 1)
FileCopy(@ScriptDir & "\internet_radio_preset.ini", @ScriptDir & "\internet_radio_preset.chs", 1)
FileCopy(@ScriptDir & "\labels.ini", @ScriptDir & "\labels.chs", 1)
FileCopy(@ScriptDir & "\list_template.ini", @ScriptDir & "\list_template.chs", 1)
FileCopy(@ScriptDir & "\main_screens.ini", @ScriptDir & "\main_screens.chs", 1)
FileCopy(@ScriptDir & "\MainMenu.ini", @ScriptDir & "\MainMenu.chs", 1)
FileCopy(@ScriptDir & "\MediaSource.ini", @ScriptDir & "\MediaSource.chs", 1)
FileCopy(@ScriptDir & "\MouseScripts.ini", @ScriptDir & "\MouseScripts.chs", 1)
FileCopy(@ScriptDir & "\poi_action_buttons.ini", @ScriptDir & "\poi_action_buttons.chs", 1)
FileCopy(@ScriptDir & "\radio_preset.ini", @ScriptDir & "\radio_preset.chs", 1)
FileCopy(@ScriptDir & "\setting.ini", @ScriptDir & "\setting.chs", 1)
FileCopy(@ScriptDir & "\skin.ini", @ScriptDir & "\skin.chs", 1)
FileCopy(@ScriptDir & "\SkinMediaPaths.ini", @ScriptDir & "\SkinMediaPaths.chs", 1)
FileCopy(@ScriptDir & "\sound.ini", @ScriptDir & "\sound.chs", 1)
FileCopy(@ScriptDir & "\theme.ini", @ScriptDir & "\theme.chs", 1)
FileCopy(@ScriptDir & "\tv_preset.ini", @ScriptDir & "\tv_preset.chs", 1)
FileCopy(@ScriptDir & "\UpdateOnlyOne.ini", @ScriptDir & "\UpdateOnlyOne.chs", 1)
FileCopy(@ScriptDir & "\UserExecTBL.ini", @ScriptDir & "\UserExecTBL.chs", 1)
MsgBox(4096, "Save", "Сохранение настроек скина выполнено.")


А так же есть тулза возврата настроек LoadSkinSetting.exe...
Развернем ее и посмотрим как происходит возврат файлов настроек обратно...
#Region
#AutoIt3Wrapper_Icon=C:\Program Files (x86)\AutoIt3\Icons\MyAutoIt3_Blue.ico
#AutoIt3Wrapper_Compression=4
#AutoIt3Wrapper_UseUpx=y
#EndRegion
Opt("TrayIconHide", 1)
FileCopy(@ScriptDir & "\GPSExec\0\poi.chs", @ScriptDir & "\GPSExec\0\poi.ini", 1)
FileCopy(@ScriptDir & "\GPSExec\1\poi.chs", @ScriptDir & "\GPSExec\1\poi.ini", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_command.chs", @ScriptDir & "\DuinoKey\duino_key_command.ini", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_info.chs", @ScriptDir & "\DuinoKey\duino_key_info.ini", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_key_list.chs", @ScriptDir & "\DuinoKey\duino_key_list.txt", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_res_key.chs", @ScriptDir & "\DuinoKey\duino_res_key.txt", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_send_commands.chs", @ScriptDir & "\DuinoKey\duino_send_commands.ini", 1)
FileCopy(@ScriptDir & "\DuinoKey\duino_temp_sensors.chs", @ScriptDir & "\DuinoKey\duino_temp_sensors.ini", 1)
FileCopy(@ScriptDir & "\Plugins\iCarNotes\iCarNotes.chs", @ScriptDir & "\Plugins\iCarNotes\iCarNotes.ini", 1)
FileCopy(@ScriptDir & "\Plugins\iCarVoiceCommander\voice_commands.chs", @ScriptDir & "\Plugins\iCarVoiceCommander\voice_commands.ini", 1)
FileCopy(@ScriptDir & "\Plugins\iCarWiFi\iCarWiFi.chs", @ScriptDir & "\Plugins\iCarWiFi\iCarWiFi.ini", 1)
FileCopy(@ScriptDir & "\AMG.chs", @ScriptDir & "\AMG.ini", 1)
FileCopy(@ScriptDir & "\apps.chs", @ScriptDir & "\apps.ini", 1)
FileCopy(@ScriptDir & "\autovol.chs", @ScriptDir & "\autovol.ini", 1)
FileCopy(@ScriptDir & "\BlueStacks.chs", @ScriptDir & "\BlueStacks.ini", 1)
FileCopy(@ScriptDir & "\browser_menu_command.chs", @ScriptDir & "\browser_menu_command.ini", 1)
FileCopy(@ScriptDir & "\buttons.chs", @ScriptDir & "\buttons.ini", 1)
FileCopy(@ScriptDir & "\buttons_preset.chs", @ScriptDir & "\buttons_preset.ini", 1)
FileCopy(@ScriptDir & "\buttons_screens.chs", @ScriptDir & "\buttons_screens.ini", 1)
FileCopy(@ScriptDir & "\cd_changer.chs", @ScriptDir & "\cd_changer.ini", 1)
FileCopy(@ScriptDir & "\contact_fav.chs", @ScriptDir & "\contact_fav.ini", 1)
FileCopy(@ScriptDir & "\dinamic_button.chs", @ScriptDir & "\dinamic_button.ini", 1)
FileCopy(@ScriptDir & "\dinamic_label.chs", @ScriptDir & "\dinamic_label.ini", 1)
FileCopy(@ScriptDir & "\duino.chs", @ScriptDir & "\duino.ini", 1)
FileCopy(@ScriptDir & "\general.chs", @ScriptDir & "\general.ini", 1)
FileCopy(@ScriptDir & "\hotkey.chs", @ScriptDir & "\hotkey.ini", 1)
FileCopy(@ScriptDir & "\Initialize.chs", @ScriptDir & "\Initialize.ini", 1)
FileCopy(@ScriptDir & "\internet_radio_preset.chs", @ScriptDir & "\internet_radio_preset.ini", 1)
FileCopy(@ScriptDir & "\labels.chs", @ScriptDir & "\labels.ini", 1)
FileCopy(@ScriptDir & "\list_template.chs", @ScriptDir & "\list_template.ini", 1)
FileCopy(@ScriptDir & "\main_screens.chs", @ScriptDir & "\main_screens.ini", 1)
FileCopy(@ScriptDir & "\MainMenu.chs", @ScriptDir & "\MainMenu.ini", 1)
FileCopy(@ScriptDir & "\MediaSource.chs", @ScriptDir & "\MediaSource.ini", 1)
FileCopy(@ScriptDir & "\MouseScripts.chs", @ScriptDir & "\MouseScripts.ini", 1)
FileCopy(@ScriptDir & "\poi_action_buttons.chs", @ScriptDir & "\poi_action_buttons.ini", 1)
FileCopy(@ScriptDir & "\radio_preset.chs", @ScriptDir & "\radio_preset.ini", 1)
FileCopy(@ScriptDir & "\setting.chs", @ScriptDir & "\setting.ini", 1)
FileCopy(@ScriptDir & "\skin.chs", @ScriptDir & "\skin.ini", 1)
FileCopy(@ScriptDir & "\SkinMediaPaths.chs", @ScriptDir & "\SkinMediaPaths.ini", 1)
FileCopy(@ScriptDir & "\sound.chs", @ScriptDir & "\sound.ini", 1)
FileCopy(@ScriptDir & "\theme.chs", @ScriptDir & "\theme.ini", 1)
FileCopy(@ScriptDir & "\tv_preset.chs", @ScriptDir & "\tv_preset.ini", 1)
FileCopy(@ScriptDir & "\UpdateOnlyOne.chs", @ScriptDir & "\UpdateOnlyOne.ini", 1)
FileCopy(@ScriptDir & "\UserExecTBL.chs", @ScriptDir & "\UserExecTBL.ini", 1)
MsgBox(4096, "Load", "Настройки скина загружены.")

[seriousstas]

SaveSkinSetting.exe
))))))
только хотел Тебе о ней написать ...
Я пробовал ей восстанавливать после "смерти" Икара(после ресета например - редко , но бывает портятся файлы настроек) и ни разу не восстановил :) Она тоже не все файлы бекапит .

[duzzy]

seriousstas

))) :)
Так давай переделаем тулзу по бэкапу ?
Добавим нужные файлы для бэкапа, потестим, я просто толком не в курсе что нужно бэкапить...
Можно чтоб каши не было делать бэкап в другую папку...

Нужен просто полный список файлов настроек которые нужно бэкапить, тулзу я закомпилю.

[pierrotm777]

sirota
Мог-бы :)

pierrotm777

I Tried - without change



After uninstall a plugin (through the control panel) :( :
You need to rename the backup files :
ExecTBL.ini.bakByMobilePhone --> ExecTBL.ini
setting.ini.bakByMobilePhone --> setting.ini
skin.ini.bakByMobilePhone --> skin.ini

[pierrotm777]

I think it's possible to restore the old .ini files after an uninstall !

I must to see how to do that !

[Gadina]

Sorry, i not found the link !!!

link (http://www.filepup.net/files/big8d1471435472.html)

[pierrotm777]

link (http://www.filepup.net/files/big8d1471435472.html)

Thanks Gadina !

As i can see a toggle version between latin and russian keyboard !
A good option would be to pass the keyboard value as option !
like:
RUN;Skinpath$Scripts\Lang_change.exe|0x4090409 !

The idea would be to have all possibilities !

[seriousstas]

Version 1.5.5 is out !!!

v1.5.5 16-8-2016
-update SMS read code.

With reading SMS really bad ..
Now reads 1 from 10-15 times
Removing .xml - it not helps

[pierrotm777]

With reading SMS really bad ..
Now reads 1 from 10-15 times
Removing .xml - it not helps
I don't understand how you use the sms !
I have not this issue !

Can you remember what phone you use ?
You don't need to remove the xml file !
Your issue has another raison !

Do you use the ALL SMS mode for your test or only UNREAD ?

[seriousstas]

Do you use the ALL SMS mode for your test or only UNREAD ?
No - simply click "Read SMS" button
Nothing happens

[pierrotm777]

Sorry, i have no issue with the sms !
But the result isn't immediate !
You need to wait a certain time if you want read all sms ?
What number of sms do you have ?

[seriousstas]

35-40
Sorry, i have no issue with the sms !
I'm testing on two phones:
First Redmi - reads SMS times out of 10 queries
Waiting for a very long time.
Second - Mediatek MT6582 - reads quickly - and then (after restart) did not work at all.
Always the status of "not connected." Helps only reinstall plug and iCar DS (till restart Icar)

[pierrotm777]

35-40

I'm testing on two phones:
First Redmi - reads SMS times out of 10 queries
Waiting for a very long time.
Second - Mediatek MT6582 - reads quickly - and then (after restart) did not work at all.
Always the status of "not connected." Helps only reinstall plug and iCar DS (till restart Icar)
Can you do some test with the BlueSoleilTest.exe demo found in the Tools directory ?
Test the map feature please !
Your phone are android phone ?

[seriousstas]

Your phone are android phone ?
Yes
BlueSoleilTest.exe
Ок, 22 (on Monday)...

[pierrotm777]

If someone can translate me these english sentence please ?
l_set_BTM_Help=Help
l_set_BTM_MobilePhoneHelpMsg=Double click a contact for save it as favorite.
l_set_BTM_FavoriteHelpMsg1=Hold on a position for save a favorite.
l_set_BTM_FavoriteHelpMsg2=Click a favorite for call it.

...

l_set_BTM_CheckSMS=Check SMS
l_set_BTM_ReadSMS=Read SMS
l_set_BTM_UnReadOnly=Unread
l_set_BTM_AllSMS=All
l_set_BTM_UnreadSmSInfo=Check Unread SMS is running !
l_set_BTM_AllSmSInfo=The program will be unresponsive for a minute or more !
l_set_BTM_SmsModels=Models
l_set_BTM_SmsSend=Send SMS
l_set_BTM_Contact=Contact :
l_set_BTM_ContactNbr=Phone N° :
l_set_BTM_MessageId=Msg Id :
l_set_BTM_MessageDate=Date :
l_set_BTM_TextToSend=Text To Send :


Thanks guys !

[pierrotm777]

I have found a big issue with the gps and the plugin !
I don't know why, but when iCarDS is started it check the GPS value and return well by example GPSSAT , GPSSPDN labels but not update these value !
I use GpsGate for my tests as simulator and have no idea why this issue !!!!!
Do need i change something into the ExecTBL.ini file ?

For have no issue with sms, the version 1.5.6 set the Lock In Motion feature to off !!!
<LockInMotion>false</LockInMotion>

[seriousstas]

keyboard language does not switch.
English characters are not correct, as in the photo above.

Change phone from the program does not work.
need restart
Displays the status is always "connected" - at all, why?
If - connect the second - the first continues to be connected as well.

[seriousstas]

l_set_BTM_Help=Помощь
l_set_BTM_MobilePhoneHelpMsg=Кликнуть дважды для сохранения в избранные
l_set_BTM_FavoriteHelpMsg1=Удерживать , для сохранения в избранные
l_set_BTM_FavoriteHelpMsg2=Выбрать избранное для звонка

...

l_set_BTM_CheckSMS=Проверить SMS
l_set_BTM_ReadSMS=Прочитать SMS
l_set_BTM_UnReadOnly=Не прочитанные
l_set_BTM_AllSMS=Все
l_set_BTM_UnreadSmSInfo=Запущена проверка SMS !
l_set_BTM_AllSmSInfo=Программа может не отвечать некоторое время !
l_set_BTM_SmsModels=Модели
l_set_BTM_SmsSend=Отправить SMS
l_set_BTM_Contact=Контакт :
l_set_BTM_ContactNbr=N° телефона :
l_set_BTM_MessageId=Id сообщения:
l_set_BTM_MessageDate=Дата :
l_set_BTM_TextToSend=Текст для отправки :

[pierrotm777]

keyboard language does not switch.
English characters are not correct, as in the photo above.
If you test the two keyboard in your desktop, please close all program other than icards, and start only icards alone.
Other program that run in same time than ds crash the keyboard !
Change phone from the program does not work.
need restart
The swap phone feature isn't ready to use . Don't use it please , just use the first phone !!!
Displays the status is always "connected" - at all, why?
If - connect the second - the first continues to be connected as well.
The status 'Connected' return a connection between Bluesoleil and the phone , not a call in status !

I have found an issue with the read sms feature, where the message wasn't full !
The last version 1.5.7 solve this issue !

Do you have always an issue with sms or it's better ?

With the 1.5.7 , it will be possible to send our position into a sms with three formats:
Google Maps, Bing Maps and Yandex Maps !
Nice for give your position to a friend !

[seriousstas]

I have found an issue with the read sms feature, where the message wasn't full !

If a lot of messages (40-60) - reading does not work.

[pierrotm777]

If a lot of messages (40-60) - reading does not work.
Ahhh, it's an important news that !!!
I suppose you have not 40-60 unread messages ?

The important thing would be to test the unread code first with 10 unread messages by example, because the goal of this feature is to have a notification when a new message arrive and not the possibility to read all the messages from your phone !!!


Can you test with the demo please and return me if with more than 40-60 message the code run or not ?


Actually, i have just 60 messages and 3 unread message without issue !!!
What android version do you use in your phones please ?

[seriousstas]

Can you test with the demo please and return me if with more than 40-60 message the code run or not ?
How ?

If read through the BlueSoleil Space - no problem.
Always load well any аmount! (android 4.4.4) :

[pierrotm777]

See this video please ! BlueSoleilTest (https://youtu.be/6LNRXXrchOU)

[pierrotm777]

How ?

If read through the BlueSoleil Space - no problem.
Always load well any аmount! (android 4.4.4) :
My phone use a 5.1 version !

[seriousstas]

See this video please ! BlueSoleilTest
See PM

[pierrotm777]

See PM

I see no new pm for this day !

I know that iphone has some issue with the SDK .
Can you try with an android phone ?

I have not this issue with my android samsung A5 2016

[seriousstas]

I see no new pm for this day !

I know that iphone has some issue with the SDK .
Can you try with an android phone ?

I have not this issue with my android samsung A5 2016
try on
android 4.4.4 (http://pccar.ru/showpost.php?p=367818&postcount=237)

[seriousstas]

Besides badly working SMS - There were known issues:
1 With a sound (always 100%)
2 Uninstalling - after removing the plug damage * .skin files
3 Keyboard - not finish ...
Will you fix?

[pierrotm777]

Besides badly working SMS - There were known issues:
1 With a sound (always 100%)
2 Uninstalling - after removing the plug damage * .skin files
3 Keyboard - not finish ...
Will you fix?

I don't understand the sound issue !
If i understand well, when you receive a call in the sound is set to maximum ?

Uninstall issue is solved !

For me , the keyboard is ready if you have not other windows opened on your desktop !

[seriousstas]

the sound is set to maximum
Yes, and have already wrote (http://pccar.ru/showpost.php?p=367118&postcount=194).

Uninstall issue is solved !
Where , Version 1.5.7 ? (http://pccar.ru/showpost.php?p=368451&postcount=2)

For me , the keyboard is ready
NO work to switch RU-ENG
but Works ENG-RU

Wrong characters displayed now the English keyboard :

[pierrotm777]

About the sound issue:
As duzzy say in the post 194 (http://pccar.ru/showpost.php?p=367118&postcount=194), in the version 1.5.9, i try to use the maximum of the iCarDS events already defined into the ExecTBL.ini file !
For that i comment the lines that follow:
/ ------------------ Сохранение пресетов микшера для телефона --------------------
/---------------------------------------------------------------------------------

/ Входящий звонок
/"ONINCOMMINGCALLSTART","ByVar;IsPhoneTalk;INCOMMINGCALLSTARTif"
/"INCOMMINGCALLSTARTif","Menu;call_in.skin||StartPhoneCall"

/"ONINCOMMINGCALLEND","ByVar;IsPhoneTalk;<<INCOMMINGCALLENDTif"
/"INCOMMINGCALLENDTif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

/ Исходящий звонок
/"ONINOUTGOINGCALLSTART","ByVar;IsPhoneTalk;INOUTGOINGCALLSTARTif"
/"INOUTGOINGCALLSTARTif","Menu;call_out.skin||StartPhoneCall"

/"ONINOUTGOINGCALLEND","ByVar;IsPhoneTalk;<<INOUTGOINGCALLENDif"
/"INOUTGOINGCALLENDif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"

and add mine:
/ (Incoming call)
"ONMOBILEPHONERINGING","ByVar;IsPhoneTalk;INCOMMINGCALLSTARTif"
"INCOMMINGCALLSTARTif","StartPhoneCall"
/ (End call)
"ONMOBILEPHONEHUNGUP","ByVar;IsPhoneTalk;<<INCOMMINGCALLENDTif"
"INCOMMINGCALLENDTif","ByVar;IsMixerSkinLoad;<<Esc||ByVar;IsPhoneOverlay;Esc<<PhoneCloseOverlay||EndPhoneCall"
/ (Outgoing call)
"ONMOBILEPHONEOUTCALL","ByVar;IsPhoneTalk;INOUTGOINGCALLSTARTif"
"INOUTGOINGCALLSTARTif","StartPhoneCall"

I have deleted all code that change the volume with a call in or a call out and think that the lines that follow do already that:
"StartPhoneCall","SetVar;IsPhoneTalk;1||ByVar;IsPausedMedia;<<CF_Pause||SaveMixerPreset_Media||LoadMixerPreset;P hone||volperc+;$vol_from_speed_full$"
"EndPhoneCall","SaveMixerPreset_Phone||LoadMixerPreset_Media||ByVa r;IsPausedMedia;<<CF_Resume||SetVar;IsPhoneTalk;0"

In case we need to resume the old volume value, with a call in, the code do:
SETVARBYCODE;OLDVOLUME;VOLUME
So, it's possible to use this OLDVOLUME variable for restore the old value:
"EndPhoneCall","SaveMixerPreset_Phone||LoadMixerPreset_Media||ByVa r;IsPausedMedia;<<CF_Resume||SetVar;IsPhoneTalk;0||SETVOL;MASTER;$OL DVOLUME$"

What the command 'LoadMixerPreset;Phone' load as file please ?

[YraY]

Hey, tell me, how can this plugin to attach call control and call release through physical buttons iCarDuino?

[pierrotm777]

Hey, tell me, how can this plugin to attach call control and call release through physical buttons iCarDuino?
For that, you need to read how the screen MOBILECALL.skin is done !
For accept a call in:
B,100,280,200,90,"MOBILEPHONE_PICKUP||MOBILEPHONE_UNMUTEMIC||MOBILEP HONE_UNMUTESPKR",""
For stop a call or not accept a call in:
B,500,280,200,90,"MOBILEPHONE_HANGUP||ESC",""
For use or not the car's speaker:
B02,300,280,200,90,"MOBILEPHONE_TRANSAUDIO",""

Create a command for each off the read codes !

[seriousstas]

duzzy
А самое прикольное что сам Блюсолей не видит тел.книгу моего телефона))) а через Икар ее можно спокойно смотреть и редактировать

Плагин Пьера мою тел.книгу не выгружает вообще...

Подтверждаю ! , из BlueSoleil Space
- не видит моей телефонной книги , как из iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.6 ,
НО через родной "Телефон" книга читается без проблем !

Confirmed! ,
BlueSoleil Space can not see my phone book as like iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.6,
But a native "Phone" book is read without any problems!

[duzzy]

pierrotm777

Standard iCarDS Mobile Phone Plugin can read and edit my phone book without any problems. As well as received calls, missed calls, dialled numbers.
And starts without delay, crashes and high CPU usage.
http://jpegshare.net/thumbs/9e/02/9e0289445c37f535cdc3cfc08f668972.jpg (http://jpegshare.net/9e/02/9e0289445c37f535cdc3cfc08f668972.png.html)

Plugin BTMobilePhone (PBAP & MAP services) version 1.5.6 with its deletion deletes important files(from LABELS, language dir) for iCarDS and iCarDS becomes not working. Bad uninstallation, leaves behind traces in the plugins directory, etc. :telephone:

No offense but from my point of view, the main functions of the plugin it calls receive calls, phonebook, SMS, search contacts from any connected phone...... they are the most important.

[pierrotm777]

pierrotm777

Standard iCarDS Mobile Phone Plugin can read and edit my phone book without any problems. As well as received calls, missed calls, dialled numbers.
And starts without delay, crashes and high CPU usage.

Where can i found how to install the standard mobile phone plugin please.
What do i need ?
I see that the conatct list return the contact's picture and i should learn how to do that with iCarDS.
I should like to know how fill a phone list by code !!!!


Plugin BTMobilePhone (PBAP & MAP services) version 1.5.6 with its deletion deletes important files(from LABELS, language dir) for iCarDS and iCarDS becomes not working. Bad uninstallation, leaves behind traces in the plugins directory, etc. :telephone:
I think that the last 1.5.9 solve these issues.


No offense but from my point of view, the main functions of the plugin it calls receive calls, phonebook, SMS, search contacts from any connected phone...... they are the most important.
Without your help i can't do nothing !

One question, do you think that my plugin will be better than the standard plugin if i solve all issues ?

Thanks for these feed back !!!!!

[duzzy]

pierrotm777

Where can i found how to install the standard mobile phone plugin please.
Standard telephone plugin comes with iCarDS installer.

Its settings in the iCarDSConfig.exe...
http://jpegshare.net/thumbs/c4/11/c411726bdf4ba076a4aebe0c38cbea39.jpg (http://jpegshare.net/c4/11/c411726bdf4ba076a4aebe0c38cbea39.png.html)

I see that the conatct list return the contact's picture and i should learn how to do that with iCarDS.
I should like to know how fill a phone list by code !!!!
I don't know how it works. Maybe you will find it easier to contact the developer of iCarDS, he helped you and explained how a phone code works in iCarDS.
one of iCarDS developer Bersenev (http://pccar.ru/member.php?u=7672)
Send him a private message explaining and a request to help in the development of the MobilePhone Plugin.

I think that the last 1.5.9 solve these issues.
Good, but the best option is testing and check an Installer before release.

Without your help i can't do nothing !
I can't help with that, I'm not a coder, a little hack here... there... :)
I can help with errors that are found at the plugin working... error report

One question, do you think that my plugin will be better than the standard plugin if i solve all issues ?
Yes, of course !
Of course it will be better with this set of functionality :)

Thanks for these feed back !!!!!
You are welcome!

[pierrotm777]

The version 1.6.0 will introduce the 'Lock in Motion' feature completely functional !

If this feature is set to true in settings, the SMS access (read or write) will not possible if the car's speed is > 0 km/h .

[seriousstas]

duzzy
Немного инфы есть здесь :
http://www.pccar.ru/showthread.php?t=14956
кстати то, как в *.ini писать ..

[pierrotm777]

I have found a method for check if the phone is connected to an external power and run very well !
This feature will be added to the version 1.6.0 .

[seriousstas]

Version 1.6.0 is out !

v1.6.0 13-9-2016


Uninstalling does not work.
But and the phone stopped ringing.
Just broke the plugin :) :
rgXtfzXu5iA

[pierrotm777]

seriousstas,
The problem is you go too quickly !!!
1.In the video send in my PM !
After click on the phone button, you must see the button on top right blinking (red circle)!
You need to wait that all top buttons pass to green (green rectangle) !!!!

2.In the video in post 261 !
The first time you run the plugin, if you click on the phone button , the plugin go to the settings!
You must select your device and click on 'apply' button for save it into the settings.
After that , you must quit iCarDS, because the plugin not run all services the first time !
It's why you have no info as you phone number, network name etc...

Run again iCarDS, wait the connection , go to the main phone screen and WAIT the popup !
If all top buttons are ok (green), you can continue, and use, by example sms services !
If not , you have a problem !

But i see we have a big issue after a call out, i can't return to the phone screen !

[seriousstas]

seriousstas,
Run again iCarDS, wait the connection , go to the main phone screen and WAIT the popup !

I hope you're joking ...
V1.5.6 work call, but V1.6.0 - does not work.
I restarted Icar 10 times.

[pierrotm777]

I have found a big issue with the MOBILECALL_IN_OVERLAY.skin screen that stop the good use of the plugin !
We need to add this line into this screen:
Script,OnScreenEnd,Esc||OverlayResume

With this add, it always possile to return to the phone screen after a call out or call in !

[pierrotm777]

I hope you're joking ...
V1.5.6 work call, but V1.6.0 - does not work.
I restarted Icar 10 times.
No, all is running well, but i don't know where is your issue !

Follow my advice !
I send a video as soon as possible !

[seriousstas]

Versions 1.5.6 and below works the call.
The next tried 1.6.0 - does not work
I can try 1.5.9 , if have a link

[seriousstas]

C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.2 DS Setup.zip
C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.3 DS Setup.zip
C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.4 DS Setup.zip
C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.5 DS Setup.zip
C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.5.6 DS Setup.zip
WORK !
C:\Users\Home_PC\Desktop\iCarDS Plugin BTMobilePhone (PBAP & MAP services) V1.6.0 DS Setup.zip
NOT WORK !

[pierrotm777]

Follow the post 264 and try please

[seriousstas]

RideRunner Skin
RRScreen call_in_overlay
screen_600x110_off.png,screen_600x110_off.png,scre en_600x110_off.png,screen_600x110_off.png
Script,OnScreenEnd,Esc||OverlayResume

/SHOWEFFECT6
/HIDEEFFECT5

/POSY=0
Added - no changes

[pierrotm777]

Call in and out not run only? Or other things!

[seriousstas]

Call in and out not run only? Or other things!

Call out (see Video (http://pccar.ru/showpost.php?p=369200&postcount=261)).
If Call in - window appears, but continues ring after lifting the handset :wacko2:

[pierrotm777]

I send you a video with call out that run very well with 1.6.0 version !!!
https://youtu.be/iZrqyptrEWw

[pierrotm777]

Call out (see Video (http://pccar.ru/showpost.php?p=369200&postcount=261)).
If Call in - window appears, but continues ring after lifting the handset :wacko2:
ring is a new feature that i have tested !
I see that !!!

Why do you say that the uninstall don't run ?
All files are removed (screens and plugin files)
And ini files are restored !

[seriousstas]

Why do you say that the uninstall don't run ?
All files are removed (screens and plugin files)
And ini files are restored !
Video Time : 3:38 (https://www.youtube.com/watch?v=rgXtfzXu5iA) after uninstall

[seriousstas]

Did you make plugin just for yourself?
Standard plug-in works as a clock - with any! telephone.
Tested on the Chinese: Redmi, Lenovo, various MTK ... Not everyone Samsung and Sony (I a Sony Z3 + - killed)

[seriousstas]

Allready said
Allready said :
I restarted Icar 10 times.

I certainly close Icar before uninstalling.
The video is not visible, it removes Bandicam
The uninstall issue is solved only after the 1.6.0 version
Video Time : 3:38 after uninstall is 1.6.0 version

[pierrotm777]

Did you make plugin just for yourself?
Standard plug-in works as a clock - with any! telephone.
Tested on the Chinese: Redmi, Lenovo, various MTC ... Not everyone Samsung and Sony (I a Sony Z3 + - killed)
I understand what you say but i have just one phone and do my test with this !
The standard use only two services , HFP and PBAP !
Mine is very complex with more services:
MAP,PAN,SPP,FTP,OPP .

iCards is more complex than RR that i know very well !
Without you i can do nothing !
I have no answer from Bersenev and other developer !
In this case, it's really difficult to code !

I use vista 32bits and framework 3.5 maximum for my code !
The goal is to find why you have not the same experience than me with this plugin !

See my last video and you will see that i have no your issues !

My code isn't perfect, and need to be improved !
I have tested the standard plugin and like as it fill the list .
We can see that it's possible to have a picture by contact in the list as it's possible with RR.

This plugin is also used by the RR community and run very well but with the same issues !
BTMobilePhone 1.6.0 for RideRunner (http://www.mp3car.com/forum/mp3car-technical-software/front-ends/road-runner/rr-plugins/rr-plugins-in-progress/2579831-new-bt-mobilephone-plugin)

Know issues for me:
-iphone can't send sms !
-iphone extract differently the vcard !
-contact's info sometime are bad !

My phone is an android 6.0 .
May be we have some issue with different os version ? I don't know !
If other guy want test the plugin with other phone, they are welcome !!!

[seriousstas]

If other guy want test the plugin with other phone, they are welcome !!!
http://pccar.ru/showpost.php?p=368846&postcount=252
http://pccar.ru/showpost.php?p=367093&postcount=193

skin.ini :

[Игорь_К]

V1.6.0 - does not work.

[Игорь_К]

phone stopped ringing.
Where download v1.5.6?

[Игорь_К]

It does not work like a video from seriusstas.
I can not make a call

[pierrotm777]

seriousstas,duzzy,Игорь_К,
When you test the plugin , do you set off the original phone control into the icards configurator ?

[pierrotm777]

Version 1.6.1 is out !

-update favorite issue (iCarDS).
-update manual startup.
-update settings after phone change (need quit RR or iCarDS).
-change sms read screen (change message text from label to custom list).
-update PAUSE and RESUME before and after call.
-update VOLUME code before and after call.
-change the iCards Language file to the good folder (C:\Program Files\TipTop software\iCar DS\Language\).
-update uninstallation (ini files and cf_ind.txt file are now well restored).

:rolleyes2::rolleyes2::rolleyes2:

[seriousstas]

pierrotm777
I will test the already version 2.0 :)
when you correct all errors...
Install Windows 8.1 (or 10), and there test
audio output, work phone book, SMS job, keyboard, uninstal, etc ...

[pierrotm777]

pierrotm777
I will test the already version 2.0 :)
when you correct all errors...
Install Windows 8.1 (or 10), and there test
audio output, work phone book, SMS job, keyboard, uninstal, etc ...

I have modified the uninstallation that do the job now (1.6.1).
Sms is running very well for me to (test with one or two unread messages and 71 already read messages).
About the sound, the sound is saved before a call and restored after the hung up.
The ring loop run during the ringing call.
I suppose that is possible to create a specific mixer phone profile don't don't know how to do.
If some one want well explain me how to do ?
I can't test w8 or w10, sorry.

Lexx09 don't want help me for the code and Bersenev to. In these conditions, I can't do miracles with the iCarDS's guys forum

[seriousstas]

I can't test w8 or w10, sorry.
Oracle VM VirtualBox :
http://gig-torrent.org/load/0-0-0-18623-20

[seriousstas]

multilingual (http://nnm-club.me/forum/viewtopic.php?t=938946)
download (http://nnm-club.me/forum/download.php?id=797224)
For low power PCs

[pierrotm777]

multilingual (http://nnm-club.me/forum/viewtopic.php?t=938946)
download (http://nnm-club.me/forum/download.php?id=797224)
For low power PCs

I have have found this torrent link !
http://maintracker.org/forum/viewtopic.php?t=5074301

[pierrotm777]

I think have found how to solve the sound issue with the phone !
Go to the mixer settings and click on the phone button (picture 1) .
Use the sliders players and main volume (picture 2).
Return to the mixer settings and hold on the phone button (picture 1) .

The phone profile now exist and is used by the commands :
"StartPhoneCall","SetVar;IsPhoneTalk;1||ByVar;IsPausedMedia;<<CF_Pause||SaveMixerPreset_Media||LoadMixerPreset;P hone||volperc+;$vol_from_speed_full$"
"EndPhoneCall","SaveMixerPreset_Phone||LoadMixerPreset_Media||ByVa r;IsPausedMedia;<<CF_Resume||SetVar;IsPhoneTalk;0"

[Winlin]

Поставил крайнюю версию, надписей на кнопках в плагине не стало, телефон вроде видит, а книгу не читает. Пока вернулся на 1.5.9. Кстати входящие номера не соотносит с записной книжкой. Вместо +79139058675 показывает 079139058675. И номера типа 89139781236 тоже не соотносит с книжкой. Пока использую плагин только как индикатор входящего звонка :(

[seriousstas]

Winlin
Дефолтный от icarDS работает хорошо у меня .. И книгу загружает
и связь стабильная , а без СМС можно обойтись ..

[Winlin]

меня он тоже всем устраивает, но НЕТ У НЕГО КНОПКИ отключения громкой связи. три года уже просим у разработчика кнопку, а он ни в какую.
я уже и скрипты писал на отключение блютуса, но работает не стабильно, связь совсем рвет.

[pierrotm777]

Поставил крайнюю версию, надписей на кнопках в плагине не стало, телефон вроде видит, а книгу не читает. Пока вернулся на 1.5.9. Кстати входящие номера не соотносит с записной книжкой. Вместо +79139058675 показывает 079139058675. И номера типа 89139781236 тоже не соотносит с книжкой. Пока использую плагин только как индикатор входящего звонка :(

I am sorry, the yandex or google translator run very bad !

If i understand well the + is replaced by a 0 ?

+79139058675 return 079139058675 when you receive a call in ?

This issue is with the version 1.5.9 or the 1.6.2 ?

Thanks for your feed back !!!!

[pierrotm777]

меня он тоже всем устраивает, но НЕТ У НЕГО КНОПКИ отключения громкой связи. три года уже просим у разработчика кнопку, а он ни в какую.
я уже и скрипты писал на отключение блютуса, но работает не стабильно, связь совсем рвет.

If you want mute micro or speaker , use these commands !
'mute/unmute micro & speaker
"mobilephone_mutemic"
"mobilephone_unmutemic"
"mobilephone_mutespkr"
"mobilephone_unmutespkr"

Try also the command "MOBILEPHONE_TRANSAUDIO" (grey button on the call in and out screen).

[duzzy]

Winlin

меня он тоже всем устраивает, но НЕТ У НЕГО КНОПКИ отключения громкой связи. три года уже просим у разработчика кнопку, а он ни в какую.
я уже и скрипты писал на отключение блютуса, но работает не стабильно, связь совсем рвет.
Думается мне что это можно сделать, через ActiveXObject... написать простенький скрипт на Автоите для подключения к Блюсолей СДК и отправлять команды на переключение громкой связи на спаренный телефон...
Далее просто делаем кнопку на экране родного Икаровского телефона и запускаем с нее скрипт переключения, в итоге получаем переключение при принятом звонке с мобилы на Икар.

-----------------------------------------------------------------------------

pierrotm777

Hi, tell me please what command you use to switch from speakerphone to mobile phone?
I want to try to connect using ActiveXObject to BlueSoleil SDK in Autoit.

And maybe you help me write small script in Autoit to switch from speakers <---> mobile phone ?
like $rr = ObjCreate("RoadRunner.sdk")
and send commands to BlueSoleil from script...

[Winlin]

I am sorry, the yandex or google translator run very bad !

If i understand well the + is replaced by a 0 ?

+79139058675 return 079139058675 when you receive a call in ?

This issue is with the version 1.5.9 or the 1.6.2 ?

Thanks for your feed back !!!!

Это 1.5.9
При входящем звонке, номер сначала определяется в виде 079139058675, затем меняется на +79139058675 , но все равно не находит его в списке абонентов.

[pierrotm777]

Winlin


Думается мне что это можно сделать, через ActiveXObject... написать простенький скрипт на Автоите для подключения к Блюсолей СДК и отправлять команды на переключение громкой связи на спаренный телефон...
Далее просто делаем кнопку на экране родного Икаровского телефона и запускаем с нее скрипт переключения, в итоге получаем переключение при принятом звонке с мобилы на Икар.

-----------------------------------------------------------------------------

pierrotm777

Hi, tell me please what command you use to switch from speakerphone to mobile phone?
I want to try to connect using ActiveXObject to BlueSoleil SDK in Autoit.

It's not possible to use Autoit for command the SDK, but it's very easy to call a RR or iCarDS command with Autoit !
By example:
$rr = ObjCreate("RoadRunner.sdk")
and after that:
$rr.Execute("MOBILEPHONE_TRANSAUDIO")
for read a value:
$rr.GetInfo("MYLABEL")
or
$rr.Getinfo("=$MYVAR$")
or
$rr.GetInd("MYIND")


And maybe you help me write small script in Autoit to switch from speakers <---> mobile phone ?
like $rr = ObjCreate("RoadRunner.sdk")
and send commands to BlueSoleil from script...
No need script for that, the grey button on the call in and out screen do that and use the command MOBILEPHONE_TRANSAUDIO .
It's a toggle command !

[Winlin]

Не понял "b19" это версия IcarDS ? У меня 1.7.0.48. И при установке плагина версии1.6.2 , на кнопках плагина надписей нет.

[Евген_21]

A hundred percent,not to build something new. It is better to contact the developer and verify everything associated with your phone. And on this basis to build additions. How many did not check your work, working on -3
Да с переводчиком туго, понятно почему не видны проблемы.

[pierrotm777]

Another solution is to keep your iCards version and copy the file FontMainBotton.txt to FontMainBotton.txt. Restart iCards.

[Евген_21]

Another solution is to keep your iCards version and copy the file FontMainBotton.txt to FontMainBotton.txt. Restart iCards.
I use the version from Bersenev. Not sure what plugin your phone will work

[Евген_21]

Try it. I think k it will work!

Thanks, will test.

[Winlin]

Поставил 1.7.0.60 , плагин 1.6.2 , пропали все надписи в настройках икара, и так и не появились надписи в плагине.

Как бы нам отсюда только кнопку поиметь :) ?

[pierrotm777]

Поставил 1.7.0.60 , плагин 1.6.2 , пропали все надписи в настройках икара, и так и не появились надписи в плагине.

Как бы нам отсюда только кнопку поиметь :) ?


If you can,
1. uninstall the plugin .
2. uninstall completely iCarDS after a backup of whet you want .
3. Reinstall the last icards version.
4. Install the plugin version 1.6.2 .

[Winlin]

С надписями разобрался. Путаница возникает из-за файла FontMainBottoN.txt
в файле setting*.skin, после установки плагина идет обращение к файлу FontMainBottoM.txt , а его нет. В общем надо файлы setting*.skin править.

Также подпись с версией Icar в них тоже не правильная.

СМС читает нормально, 950 смс прочел за минуту.

Кстати что за новые кнопки добавились на экране настроек с названием dummy1-dummy9 и еще без названия?

формат телефона +7913ХХХХХХХ стал определяться в записной книжке, а формат 8913ХХХХХХХ так же не определяется.

Еще проблема, если нажать на кнопку телефона на главном экране, затем закрыть экран плагина , нажав Х, снова кнопка телефона не работает, пока не нажмешь на любую другую кнопку. если же выйти из экрана плагина горячей клавишей переключения на начальный экран, то кнопка работает.

[pierrotm777]

С надписями разобрался. Путаница возникает из-за файла FontMainBottoN.txt
в файле setting*.skin, после установки плагина идет обращение к файлу FontMainBottoM.txt , а его нет. В общем надо файлы setting*.skin править.

OK :smile1:

Также подпись с версией Icar в них тоже не правильная.

The iCards version isn't a plugin issue !

СМС читает нормально, 950 смс прочел за минуту.

Cool:smile1:

Кстати что за новые кнопки добавились на экране настроек с названием dummy1-dummy9 и еще без названия?

dummy in setting screen are for future options if needed !

формат телефона +7913ХХХХХХХ стал определяться в записной книжке, а формат 8913ХХХХХХХ так же не определяется.

I don't understand this issue ! Can you explain me please ?

Еще проблема, если нажать на кнопку телефона на главном экране, затем закрыть экран плагина , нажав Х, снова кнопка телефона не работает, пока не нажмешь на любую другую кнопку. если же выйти из экрана плагина горячей клавишей переключения на начальный экран, то кнопка работает.
I shall see that as soon as possible !

Thanks for these feed back !!!

[Winlin]

"Сообщение от Winlin Посмотреть сообщение
Также подпись с версией Icar в них тоже не правильная."

The iCards version isn't a plugin issue !



Это проблема плагина, т.к. после установки плагина в файлах setting*.skin

строки
L,342,519,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,18,#FontMainBottomSt yle#,"=iCar DS ||RRVER","CENTER",
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin||= $ChameleonSkinVersion$","CENTER",

меняются на неправильные



Сообщение от Winlin Посмотреть сообщение
формат телефона +7913ХХХХХХХ стал определяться в записной книжке, а формат 8913ХХХХХХХ так же не определяется.

I don't understand this issue ! Can you explain me please ?


привел все к виду +7913хххххххх

[Winlin]

"Сообщение от Winlin Посмотреть сообщение
Еще проблема, если нажать на кнопку телефона на главном экране, затем закрыть экран плагина , нажав Х, снова кнопка телефона не работает, пока не нажмешь на любую другую кнопку. если же выйти из экрана плагина горячей клавишей переключения на начальный экран, то кнопка работает."

I shall see that as soon as possible !

Thanks for these feed back !!!

Запуск Icar, нажали кнопку "телефон".
45265

Затем закрываем плагин

45266

теперь снова нажимаем кнопку "телефон"
45267

и ничего не происходит


Чтобы попасть на вкладку плагина надо нажать, например, кнопку "радио", закрыть вкладку "радио", а затем нажать "телефон"

[pierrotm777]

Это проблема плагина, т.к. после установки плагина в файлах setting*.skin

строки
L,342,519,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,18,#FontMainBottomSt yle#,"=iCar DS ||RRVER","CENTER",
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin||= $ChameleonSkinVersion$","CENTER",

меняются на неправильные

New code in b19 version is modified like that:
L,342,519,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,18,#FontMainBottomSt yle#,"=iCar DS ||=v$ZRRVER$","CENTER",
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin||=v$ChameleonSkinVersion$","CENTER",

See these lines just after the icards install and before the plugin's install !



привел все к виду +7913хххххххх
I don't understand!
A number like that +7913хххххххх isn't well seen into the call in screen ?

[duzzy]

Winlin
Это проблема плагина, т.к. после установки плагина в файлах setting*.skin

строки
L,342,519,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,18,#FontMainBottomSt yle#,"=iCar DS ||RRVER","CENTER",
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin||= $ChameleonSkinVersion$","CENTER",

меняются на неправильные
Строки правильные, правильно как раз не Botton а Bottom.

Сейчас народ использует для установки Икара(с исправлениями и дополнениями) сборку (http://pccar.ru/showthread.php?t=23946) от Lexx09. У сборки уже 19-ый билд...

[seriousstas]

Winlin
и ничего не происходит
Чтобы попасть на вкладку плагина надо нажать, например, кнопку "радио", закрыть вкладку "радио", а затем нажать "телефон"
не в обиду pierrotm777 , предлагаю подождать версию 2.0.0,
с надеждой ,что что-то изменится .
У меня и у duzzy к примеру не загружается телефонная книга,
при нормальной загрузке на дефолтном "Телефон" .
СМС да, на одном телефоне хоршо работает , на другом грузит через раз и тд ..

[Winlin]

Winlin

Строки правильные, правильно как раз не Botton а Bottom.

Сейчас народ использует для установки Икара(с исправлениями и дополнениями) сборку (http://pccar.ru/showthread.php?t=23946) от Lexx09. У сборки уже 19-ый билд...

Эти строки я привел из-за переменной ||RRVER
и ChameleonSkinVersion

Может конечно у меня билд Икара старый -48 -ой, но меня устраивает
Да и в качестве эксперимента ставил последний с сайта http://pccar.ru/showthread.php?t=20347 - отличий не было.

А проблемный файл со шрифтами не здесь указывается.

я вот подпилил немного напильником, и в общем плагином уже можно пользоваться. Было бы лучше все же плагин дать в виде изначальном с инструкцией что куда прописать, как раньше было. Чтобы он при инстале не переписывал половину скина, а я бы сам вносил изменения , понимая, что и для чего.

[pierrotm777]

Winlin

не в обиду pierrotm777 , предлагаю подождать версию 2.0.0,
с надеждой ,что что-то изменится .

I am not ok with you ! Each version add or solve something !
I don't understand why you can't load the contacts !
May be a w10 issue !
I can test only on vista 32bits , sorry !

The plugin run as well as possible !
I have posted several video which proves than the contacts are well loaded !
We need to found why you have these issues and what you don't like !
That would be nice, is that users add into their signature the phone type with the os version ! That can help me !
I know that the plugin as some issues with the iPhone.

Another problem for me is the russian language ! Yandex or Google translator return very bad results.

If the guys that want use this plugin can return me what is running and what is not running !

That i can change, is don't add the settings screen modified !

[pierrotm777]

As i can see, the only difference into the setting5.skin file was:
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin||=v$ChameleonSkinVersion$","CENTER",
must to be:
L,342,557,560,33,#FontMainBottomRed#,#FontMainBott omGreen#,#FontMainBottomBlue#,16,#FontMainBottomSt yle#,"=Chameleon skin ||=v$ChameleonSkinVersion$","CENTER",

[Winlin]

Вот 45288

[pierrotm777]

Вот 45288
Thanks for your help !
I see you don't use the last iCarDS version (b19) .
1.skin.ini
In the begin of this file, you have not ZRRVER=1.7.0.60b19
In the end, you have well plugin_MobilePhone_is=1

2.setting.ini
In the end, you have not plugin_MobilePhone_is=1
Please, add it.

3.Exectbl.ini
It's not the last version but all is ok !

Update the setting.ini file and the plugin will be well loaded !

[Winlin]

2.setting.ini
In the end, you have not plugin_MobilePhone_is=1
Please, add it.


Update the setting.ini file and the plugin will be well loaded !

ничего не поменялось.

нажимаю "телефон", затем закрываю , нажав Х, потом снова нажимаю телефон. ничего не происходит.

[Евген_21]

ничего не поменялось.

нажимаю "телефон", затем закрываю , нажав Х, потом снова нажимаю телефон. ничего не происходит.
Да ,это проблема уже давно. Забей, жди релиза когда будет все работать, на 5. А чем тебе встроенный тел... не нравиться , работает ,без проблем.

[Winlin]

да я уже отвечал
мне нужна кнопка, переключающая звонок с громкой связи на телефон.

[pierrotm777]

ничего не поменялось.

нажимаю "телефон", затем закрываю , нажав Х, потом снова нажимаю телефон. ничего не происходит.

Can you:
1.Uninstall the plugin AND your old iCarDS.
2.Install the last iCarDS version and reinstall the plugin .

[pierrotm777]

Winlin,
Before uninstall all, can you:
1.Edit your MobilePhone.xml and set log file 'true' ?
2.Try again to use the plugin !
3.Send me your MobilePhone.xml and MobilePhone.log files.

Thanks

[Евген_21]

да я уже отвечал
мне нужна кнопка, переключающая звонок с громкой связи на телефон.
А ,скриптом этого сделать нельзя?
Может Lexx09 поможет.

[Winlin]

А ,скриптом этого сделать нельзя?
Может Lexx09 поможет.

ну не знаю в ветке Икар+телефон сто лет уже просим эту кнопку. Берсенев не реагирует.

[pierrotm777]

А ,скриптом этого сделать нельзя?
Может Lexx09 поможет.
I don't understand what is your need !
A new button for have sound from the phone and not from the speakers ?

[Евген_21]

I don't understand what is your need !
A new button for have sound from the phone and not from the speakers ?


No, he needs a button to switch the phone on speaker and Vice versa on the phone
I think the translation will understand

[pierrotm777]

No, he needs a button to switch the phone on speaker and Vice versa on the phone
I think the translation will understand

This button already exist !
See the picture (top middle button) !
You can also use the command MOBILEPHONE_TRANSAUDIO :big:

[Евген_21]

This button already exist !
See the picture (top middle button) !
You can also use the command MOBILEPHONE_TRANSAUDIO :big:


You don't understand the switch button skin from the iCarDS from the developer. Switching from phone to phone. Not about your plugin, Bersenev

[pierrotm777]

You don't understand the switch button skin from the iCarDS from the developer. Switching from phone to phone. Not about your plugin, Bersenev

How, switch from the original phone to the new is not possible without quit icards .
I suppose you want use the original phone for phone feature and the new plugin for other feature ?

[pierrotm777]

Original phone command is:
"CF_Phoco","Phoco||Set_PhocoMode"
Command for the new plugin is:
"CF_Phoco","MOBILEPHONE"

That is possible is to replace the original phone command by a new command that load a little screen with two buttons:
1."Phoco||Set_PhocoMode"
2."MOBILEPHONE"

And the little screen would be loaded by:
"CF_Phoco","POPUP;MENU_PHONESELECTOR.skin;5"

It's an idea !