Индикация температуры

[nemo61]

Подскажите, а есть ли возможность вывести индикацию о температуре, которую выдает материнская плата?

[DNZ_]

Сообщение от nemo61

Подскажите, а есть ли возможность вывести индикацию о температуре, которую выдает материнская плата?

Файл Skin Commands.txt:

"MBMXX"			- Information from Mother Board Monitor 5 (XX denotes the sensor number).
			  When using this, the tooltip defines the format of display examples are:
			  CODE   , Tooltip
			  "MBM01", "C2F"	(Celcius to Farenheit conversion, "F2C" also available)
			  "MBM01", "0C"		(0 is replaced to show "59C", could also be "0.0 C" etc)
			  "MBM49", "0 RPM"	(0 is replaced to show "4216 RPM", "0.00V" etc)
"SFXXX"			- Information from SpeedFan -- SF codes start with a letter denoting the type of Info.
			  'v' for voltage, 't' for temperature and 'f' for fan. 
			  For instance '"SFV3" would be the third voltage sensor

Себе сделал вот так:

L401,500,150,100,030,255,255,255,14,"ISOCPEUR:B","=CPU temp:","RIGHT"
L402,600,150,100,030,255,255,255,14,"ISOCPEUR:B","SFT2"," 0.0 `C","LEFT"

L403,500,170,100,030,255,255,255,14,"ISOCPEUR:B","=MBR temp:","RIGHT"
L404,600,170,100,030,255,255,255,14,"ISOCPEUR:B","SFT0"," 0.0 `C","LEFT"

L405,500,190,100,030,255,255,255,14,"ISOCPEUR:B","=HDD temp:","RIGHT"
L406,600,190,100,030,255,255,255,14,"ISOCPEUR:B","SFT6"," 0.0 `C","LEFT"

L407,500,220,100,030,255,255,255,14,"ISOCPEUR:B","=CPU fan:","RIGHT"
L408,600,220,100,030,255,255,255,14,"ISOCPEUR:B","SFF2"," 0000 RPM","LEFT"

L409,500,240,100,030,255,255,255,14,"ISOCPEUR:B","=MBR fan:","RIGHT"
L410,600,240,100,030,255,255,255,14,"ISOCPEUR:B","SFF0"," 0000 RPM","LEFT"

Естественно не забыть установить и запустить SpeedFan или MBM.

[nemo61]

Спасибо, получилось.