MobilePhone Plugin

[Winlin]

Перед установкой версии от Lexx09 надо полностью удалить текущую, а потом все снова настраивать?
Или можно поверх ставить? И не понял его твики системы при установке выбираются или устанавливаются без спроса?

[duzzy]

Winlin

Перед установкой версии от Lexx09 надо полностью удалить текущую

Конечно иначе будет каша...
(любые установки лучше делать по чистому, потом проблем будет меньше)

И не понял его твики системы при установке выбираются или устанавливаются без спроса?

Если боишься попробуй поставить на виртуальной машине(VirtualBox или VMWare player).
При запуске инсталлятор выдает окно с галками что нужно ставить а что нет...
вот такое...

в нем можно выбрать что ставить.

[pierrotm777]

Сообщение от duzzy

I read this post, and I speak absolutely about another.
Your plugin interacts directly with the program BlueSoleil from icar buttons(simple explanation), right ?
Well then why not make a small program to send commands BlueSoleil to switch from speakers to phone(toggle between speakers and phone) on the already paired phone.

icards user can make button in standard phone screen and run this little program from button to toggle between speakers and phone, and that's all.

fist run prog read from BlueSoleil what phone is paired...
then...
write to ini address of phone(or another opt)
[connected_phone]
phone=(phone address or id dot know how BlueSoleil interact with phone)
then...
write flag about fist run end(need for next run to not check what phone is paired)
[fist_run]
1_run=false

next run prog just read from ini and toggle paired phone from speakers to phone and vice versa...

I just described the simple logic of this program.
This program will be very useful to the user using a standard icards plug-in.

You want a button on the original phoco.skin screen that command MY plugin and switch speaker and phone ?

What plugin will use this ini file mine plugin or the original ?

[Winlin]

This problem is fixed
http://pccar.ru/showpost.php?p=372865&postcount=382

1.6.4c

[Winlin]

1 If the Subscriber has 2 phone numbers in the phone book,
When reading SMS photo only shows for the first number , in the second number of the photo does not show


2 in the history, if there are no numbers in the phone book, you must display the phone number not null, as it is now.

[Winlin]

Сообщение от Winlin

1 If the Subscriber has 2 phone numbers in the phone book,
When reading SMS photo only shows for the first number , in the second number of the photo does not show

fix this copy to C:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\Photo
file with name second number

[Winlin]

Сообщение от pierrotm777

Try this new version 1.6.4c

Correct one and then you break another. Fixed to work with SMS, but broke the outgoing call.

[pierrotm777]

Сообщение от Winlin

fix this copy to C:\Program Files\TipTop software\iCar DS\Extentions\MobilePhone\Photo
file with name second number

I can also modify the code for have a picture by number ! It's relatively easy !

[pierrotm777]

Call out issue is into the exectbl.ini file :
Replace:

"OverlayResumePhoneOn","BYVAR;NEWPLUGINPHONEUSED;Overlay;call_in_overlay.skin<<Overlay;MOBILECALL_IN_OVERLAY.skin"

by

"OverlayResumePhoneOn","Overlay;MOBILECALL_IN_OVERLAY.skin"

[pierrotm777]

I have found an error into the sms reader screen !
Say button is bad:
Replace:

B,0,336,130,72,"PAUSE||DVBMUTE;1||WAIT;1||SAY;$MOBILEPHONE_MSGTEXT$||WAIT;1||RESUME||DVBMUTE;0",""

by:

B,0,336,130,72,"PAUSE||WAIT;1||SETVARBYCODE;MSGTEXT;CLTEXT||SAY;$MSGTEXT$||WAIT;1||RESUME",""