[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.8 (utjerry@urbetter-linux2) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) ) #46 PREEMPT Sat Apr 28 15:58:25 CST 2012
[    0.000000] CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: SMDKV210
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x41001099
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU S5PV210/S5PC110 (id 0x43110220)
[    0.000000] s5pv210_init_clocks: initializing clocks
[    0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
[    0.000000] s5pv210_setup_clocks: registering clocks
[    0.000000] s5pv210_setup_clocks: clkdiv0 = 14131440, clkdiv1 = 00000400
[    0.000000] s5pv210_setup_clocks: xtal is 24000000
[    0.000000] S5PV210: PLL settings, A=1152000000, M=667000000, E=80000000 V=54000000
[    0.000000] S5PV210: ARMCLK=1152000000, HCLKM=230400000, HCLKD=166750000
[    0.000000] HCLKP=133400000, PCLKM=115200000, PCLKD=83375000, PCLKP=66700000
[    0.000000] sclk_dmc: source is sclk_a2m (0), rate is 230400000
[    0.000000] sclk_onenand: source is hclk_dsys (1), rate is 166750000
[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[    0.000000] uclk1: source is mout_mpll (6), rate is 66700000
[    0.000000] sclk_mixer: source is sclk_dac (0), rate is 54000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimc: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam0: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_cam1: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_fimd: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mmc: source is mout_mpll (6), rate is 51307692
[    0.000000] sclk_mmc: source is mout_epll (7), rate is 80000000
[    0.000000] sclk_mfc: source is sclk_a2m (0), rate is 230400000
[    0.000000] sclk_g2d: source is sclk_a2m (0), rate is 230400000
[    0.000000] sclk_g3d: source is sclk_a2m (0), rate is 230400000
[    0.000000] sclk_csis: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_spi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwi: source is ext_xtal (0), rate is 24000000
[    0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
[    0.000000] ### 111111 init !!!!
[    0.000000] ### 111111 init !!!!
[    0.000000] ### 111111 init !!!!
[    0.000000] ### 111111 init !!!!
[    0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x2dc00000, 0-bank base(0x2dc00000)
[    0.000000] s5p: 37748736 bytes system memory reserved for mfc at 0x4dbf6000, 1-bank base(0x4dbf6000)
[    0.000000] s5p: 6291456 bytes system memory reserved for fimc0 at 0x4d5f6000, 1-bank base(0x4d5f6000)
[    0.000000] s5p: 10137600 bytes system memory reserved for fimc1 at 0x4cc4b000, 1-bank base(0x4cc4b000)
[    0.000000] s5p: 6291456 bytes system memory reserved for fimc2 at 0x4c64b000, 1-bank base(0x4c64b000)
[    0.000000] s5p: 16777216 bytes system memory reserved for jpeg at 0x2cc00000, 0-bank base(0x2cc00000)
[    0.000000] s5p: 31457280 bytes system memory reserved for fimd at 0x4a84b000, 1-bank base(0x4a84b000)
[    0.000000] s5p: 1843200 bytes system memory reserved for pmem_gpu1 at 0x2ca3e000, 0-bank base(0x2ca3e000)
[    0.000000] s5p: 8388608 bytes system memory reserved for g2d at 0x2c23e000, 0-bank base(0x2c23e000)
[    0.000000] On node 0 totalpages: 92819
[    0.000000]   Normal zone: 1536 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 91283 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91283
[    0.000000] Kernel command line: root=/dev/mmcblk0p4 rootfstype=ext4 init=/init console=ttySAC0,115200  lcd=ut7gm camera=ut2055 mod=5 pwmfreq=1000 man= lun= umsmodel= umsvendor= umsproduct= usbvid= usbpid= camrev= utmodel=712bp i2c1freq=  audiocodec=wm8976 codec=wm8976 codec=wm8976 pcb=single bltype=p
[    0.000000] select_lcd_name: str=ut7gm
[    0.000000] select_camera_name: str=ut2055
[    0.000000] g_selected_pwm_freq: str=1000
[    0.000000] select_pwm_freq pwm_period_ns = 1000000
[    0.000000] select_manufacturer: str=
[    0.000000] select_umsvendor: str=
[    0.000000] g_selected_camera_rev: str=
[    0.000000] select_utmodel: str=712bp
[    0.000000] select_codec: str=wm8976
[    0.000000] select_pcb_type: str=single
[    0.000000] select_backlight_type: str=p
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 194MB 168MB 0MB = 362MB total
[    0.000000] Memory: 358476k/511488k available, 12800k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xff000000 - 0xffe00000   (  14 MB)
[    0.000000]     vmalloc : 0xf0800000 - 0xfd000000   ( 200 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0036000   ( 184 kB)
[    0.000000]       .text : 0xc0036000 - 0xc0678e14   (6412 kB)
[    0.000000]       .data : 0xc067a000 - 0xc06c4800   ( 298 kB)
[    0.000000]        .bss : 0xc06c4824 - 0xc0803990   (1277 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:208
[    0.000000] VIC @fd000000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd010000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd020000: id 0x00041192, vendor 0x41
[    0.000000] VIC @fd030000: id 0x00041192, vendor 0x41
[    0.000000] sched_clock: 32 bits at 33MHz, resolution 29ns, wraps every 128784ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC0] enabled
[    0.520579] Calibrating delay loop... 1149.33 BogoMIPS (lpj=2873344)
[    0.549998] pid_max: default: 32768 minimum: 301
[    0.550128] Mount-cache hash table entries: 512
[    0.550411] Initializing cgroup subsys debug
[    0.550449] Initializing cgroup subsys cpuacct
[    0.550489] Initializing cgroup subsys freezer
[    0.552680] CPU: Testing write buffer coherency: ok
[    0.557737] ut_register_lcd: add lcd: ut7gm
[    0.561689] ut_register_lcd: add lcd: ut08gm
[    0.565925] ut_register_lcd: add lcd: jw08009
[    0.570257] ut_register_lcd: add lcd: ut10gm
[    0.574498] ut_register_lcd: add lcd: 100pxn1
[    0.578836] ut_register_lcd: add lcd: ut10gm_709
[    0.583428] ut_register_lcd: add lcd: ut10gm_706
[    0.590064] print_constraints: dummy: 
[    0.591831] NET: Registered protocol family 16
[    0.597242] S3C Power Management, Copyright 2004 Simtec Electronics
[    0.607373] invalid media device
[    0.607402] invalid media device
[    0.608814] invalid media device
[    0.612245] invalid media device
[    0.615252] add wm8976 i2c
[    0.617917] pmem_start is 0x0
[    0.620871] ---pmem_start is 0x4a84b000
[    0.624713] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.632227] smdkc110_setup_clocks: sclk_mmc: source is mout_mpll, rate is 47642857
[    0.640255] S5PV210: Initializing architecture
[    0.644721] s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
[    0.652917] print_constraints: pd_tv_supply: 5000 mV normal 
[    0.658373] print_constraints: pd_lcd_supply: 5000 mV normal 
[    0.664074] print_constraints: pd_g3d_supply: 5000 mV normal 
[    0.669788] print_constraints: pd_mfc_supply: 5000 mV normal 
[    0.675505] print_constraints: pd_audio_supply: 5000 mV normal 
[    0.696752] bio: create slab <bio-0> at 0
[    0.697251] print_constraints: B_PWR_5V: 5000 mV 
[    0.698404] SCSI subsystem initialized
[    0.698480] s5pv210_spi_cfg_gpio return
[    0.698840] s5pv210_spi_cfg_gpio return
[    0.702259] usbcore: registered new interface driver usbfs
[    0.706970] usbcore: registered new interface driver hub
[    0.712175] usbcore: registered new device driver usb
[    0.717605] i2c i2c-3: Not I2C compliant: can't read SCL
[    0.722367] i2c i2c-3: Bus may be unreliable
[    0.726605] i2c-gpio i2c-gpio.3: using pins 25 (SDA) and 24 (SCL, no clock stretching)
[    0.734595] s3c-i2c s3c2440-i2c.0: slave address 0x10
[    0.739523] s3c-i2c s3c2440-i2c.0: bus frequency set to 378 KHz
[    0.745936] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
[    0.750814] s3c-i2c s3c2440-i2c.1: slave address 0x10
[    0.755810] s3c-i2c s3c2440-i2c.1: bus frequency set to 297 KHz
[    0.762324] i2c i2c-1: Failed to register i2c client wm8976 at 0x1a (-16)
[    0.768463] i2c i2c-1: Can't create device at 0x1a
[    0.773229] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
[    0.778610] s3c-i2c s3c2440-i2c.2: slave address 0x10
[    0.783613] s3c-i2c s3c2440-i2c.2: bus frequency set to 65 KHz
[    0.790011] print_constraints: VALIVE_1.1V: 1100 mV 
[    0.794595] print_constraints: VUOTG_D+VUHOST_D_1.1V: 1100 mV 
[    0.800477] print_constraints: V_MIPI_1.8V: 1800 mV 
[    0.805518] print_constraints: VMMC+VEXT_2.8V: 2800 mV 
[    0.810696] print_constraints: VCC_2.6V: 2600 mV 
[    0.815395] print_constraints: VDAC_2.8V: 2800 mV 
[    0.820214] print_constraints: VUOTG_A+VUHOST_A_3.3V: 3300 mV 
[    0.825962] print_constraints: VADC+VSYS+VKEY_2.8V: 2800 mV 
[    0.831324] print_constraints: VCC_ARM: 750 <--> 1500 mV at 750 mV 
[    0.837559] print_constraints: VCC_INTERNAL: 950 <--> 1200 mV at 750 mV 
[    0.844412] print_constraints: VCC_MEM: 1800 mV 
[    0.848833] max8698-pmic: probe of max8698-pmic failed with error -16
[    0.855448] s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
[    0.861068] Headset plug out.
[    0.861073] Headset plug out.
[    0.863473] Headset plug out.
[    0.863478] Headset plug out.
[    1.164987] #Headset plug  handset_state=0, ear_jack_state=1, report_state=0, report_old_state=0.
[    1.165269] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    1.165755] Bluetooth: Core ver 2.16
[    1.165878] NET: Registered protocol family 31
[    1.165914] Bluetooth: HCI device and connection manager initialized
[    1.172205] #Headset plug  handset_state=0, ear_jack_state=1, report_state=0, report_old_state=0.
[    1.181070] Bluetooth: HCI socket layer initialized
[    1.185892] Bluetooth: L2CAP socket layer initialized
[    1.190917] Bluetooth: SCO socket layer initialized
[    1.196045] cfg80211: Calling CRDA to update world regulatory domain
[    1.202154] Switching to clocksource s5p_clocksource_timer
[    1.209996] Switched to NOHz mode on CPU #0
[    1.219082] NET: Registered protocol family 2
[    1.219240] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    1.223674] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    1.230386] TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
[    1.237061] TCP: Hash tables configured (established 16384 bind 16384)
[    1.243259] TCP reno registered
[    1.246369] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    1.252283] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    1.258746] NET: Registered protocol family 1
[    1.263105] PMU: registered new PMU device of type 0
[    1.267979] S5PV210 ADC driver, (c) 2010 Samsung Electronics
[    1.273544] adc res->start = 0xe1700000
[    1.273547] 
[    1.279124] Loaded driver for PL330 DMAC-0 s3c-pl330
[    1.283755] 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-2 Num_Events-32
[    1.289856] Loaded driver for PL330 DMAC-1 s3c-pl330
[    1.294738] 	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.300853] Loaded driver for PL330 DMAC-2 s3c-pl330
[    1.305739] 	DBUFF-8x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    1.318360] ashmem: initialized
[    1.329427] ROMFS MTD (C) 2007 Red Hat, Inc.
[    1.329649] msgmni has been set to 700
[    1.330190] io scheduler noop registered
[    1.330224] io scheduler deadline registered
[    1.331066] io scheduler cfq registered (default)
[    1.335754] start plist test
[    1.341009] end plist test
[    1.341254] S5P Touchscreen driver, (c) 2008 Samsung Electronics
[    1.347247] s3c_ts_init
[    1.347249] 
[    1.351195] s3c_ts_probe
[    1.351197] 
[    1.355135] select ts model 712
[    1.358249] gPress_value = 0x1000
[    1.361531] ####[s3c_ts ]: s3c_ts_probe(), probe start !
[    1.361552] remap to 0xE1701000. done
[    1.365208] s3c_ts got loaded successfully : 12 bits
[    1.370340] input: s3c_ts as /devices/virtual/input/input0
[    1.375640] ####[s3c_ts ]: s3c_ts_probe(), probe end ! OK
[    1.375825] Urbetter power GPIO: add power_gpio config proc file
[    1.381583] power_gpio: detected single board type PCB.
[    1.386807] usb_hub_reset
[    1.551412] power_gpio sdio_reset, power = 0
[    1.751495] encrypt_check Check encrypt device registed successed!!
[    1.751550] Urbetter regwatch: add regwatch proc file
[    1.752119] win->id=2, pmem_start=0x4b403000
[    1.752158] s3cfb s3cfb: [fb2] dma: 0x4b403000, cpu: 0xf0c00000, size: 0x002ee000
[    1.754913] FIMD src sclk = 166750000
[    1.755836] ctrl->pixclock_hz = 58405920
[    1.759778] div = 3
[    1.761840] s3cfb s3cfb: registered successfully
[    1.766450] +++++++++ture color disp+++++++fb_prepare_logo(); [80][480]
[    1.773016] Start display and show logo
[    1.776939] fb_show_truecolor_logo(); bfType=[4d42], size=[119436], [0];
[    1.783508] Logo info W[800](800) H[480](480) C[24] widthGap=[-1], heighGap=[-1]
[    1.953555] s3cfb_late_resume is called
[    1.953759] FIMD src sclk = 166750000
[    1.953788] ctrl->pixclock_hz = 58405920
[    1.953819] div = 3
[    1.953843] s3cfb_late_resume is complete
[    1.953874] ut_backlight_late_resume
[    2.254257] s5pv210-uart.0: ttySAC0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
[    2.257793] s5pv210-uart.1: ttySAC1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
[    2.267662] s5pv210-uart.2: ttySAC2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
[    2.277657] s5pv210-uart.3: ttySAC3 at MMIO 0xe2900c00 (irq = 28) is a S3C6400/10
[    2.287847] sdhci: Secure Digital Host Controller Interface driver
[    2.287894] sdhci: Copyright(c) Pierre Ossman
[    2.287983] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133400000 Hz)
[    2.288036] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133400000 Hz)
[    2.289249] s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
[    2.296215] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
[    2.303117] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133400000 Hz)
[    2.309632] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133400000 Hz)
[    2.316223] s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
[    2.324185] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
[    2.330031] s3c-sdhci s3c-sdhci.2: clock source 0: hsmmc (133400000 Hz)
[    2.336587] s3c-sdhci s3c-sdhci.2: clock source 1: hsmmc (133400000 Hz)
[    2.343185] s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (51307692 Hz)
[    2.350071] mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
[    2.358022] s3c-sdhci s3c-sdhci.3: clock source 0: hsmmc (133400000 Hz)
[    2.365553] s3c-sdhci s3c-sdhci.3: clock source 1: hsmmc (133400000 Hz)
[    2.370130] s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (80000000 Hz)
[    2.377013] mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
[    2.384990] PA FB = 0x4B403000, bits per pixel = 32
[    2.388782] screen width=800 height=480 va=0xeb403000 pa=0x4b403000
[    2.395023] xres_virtual = 800, yres_virtual = 960, xoffset = 0, yoffset = 0
[    2.402016] fb_size=3072000
[    2.405810] byteSize=1536000, num of fb=2
[    2.410780] Back frameBuffer[0].VAddr=eb57a000 PAddr=4b57a000 size=1536000
[    2.415616] No space for NV12 video carveout
[    2.425176] brd: module loaded
[    2.428226] loop: module loaded
[    2.428305] pmem_gpu1: 1 init
[    2.430275] S3C NAND Driver, (c) 2008 Samsung Electronics
[    2.434405] Bullshit what the hell are you doing here??????????????????????????????
[    2.441889] Unknown NAND Device.
[    2.446235] PPP generic driver version 2.4.2
[    2.449717] PPP Deflate Compression module registered
[    2.454494] PPP BSD Compression module registered
[    2.459470] PPP MPPE Compression module registered
[    2.463903] NET: Registered protocol family 24
[    2.468338] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.474932] s5p-ehci s5p-ehci: s5pv210 EHCI
[    2.479014] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
[    2.486415] s5p-ehci s5p-ehci: irq 87, io mem 0xec200000
[    2.491277] mmc0: new high speed MMC card at address 0001
[    2.496888] mmcblk0: mmc0:0001 NCard  3.71 GiB 
[    2.501203] mmcblk0boot0: mmc0:0001 NCard  partition 1 2.00 MiB
[    2.507048] s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
[    2.513006] mmcblk0boot1: mmc0:0001 NCard  partition 2 2.00 MiB
[    2.518347] hub 1-0:1.0: USB hub found
[    2.522014] hub 1-0:1.0: 1 port detected
[    2.526720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.532154]  mmcblk0: p1 p2 p3 p4
[    2.535973] s5p-ohci s5p-ohci: s5pv210 OHCI
[    2.539734] s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
[    2.547680] s5p-ohci s5p-ohci: irq 87, io mem 0xec300000
[    2.552417]  mmcblk0boot1: unknown partition table
[    2.558470]  mmcblk0boot0: unknown partition table
[    2.607256] hub 2-0:1.0: USB hub found
[    2.607300] hub 2-0:1.0: 1 port detected
[    2.608863] usbcore: registered new interface driver cdc_acm
[    2.608907] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.608967] Initializing USB Mass Storage driver...
[    2.611234] usbcore: registered new interface driver usb-storage
[    2.617104] USB Mass Storage support registered.
[    2.621909] usbcore: registered new interface driver usbserial
[    2.627636] USB Serial support registered for generic
[    2.632639] usbcore: registered new interface driver usbserial_generic
[    2.640035] usbserial: USB Serial Driver core
[    2.645434] USB Serial support registered for Garmin GPS usb/tty
[    2.649441] usbcore: registered new interface driver garmin_gps
[    2.655235] garmin_gps: v0.36:garmin gps driver
[    2.659808] USB Serial support registered for navman
[    2.664779] usbcore: registered new interface driver navman
[    2.670305] USB Serial support registered for GSM modem (1-port)
[    2.676364] usbcore: registered new interface driver option
[    2.682790] option: v0.7.2:USB Driver for GSM modems
[    2.688760] USB Serial support registered for pl2303
[    2.691722] usbcore: registered new interface driver pl2303
[    2.697177] pl2303: Prolific PL2303 USB to serial adaptor driver
[    2.703254] USB Serial support registered for Qualcomm USB modem
[    2.709235] usbcore: registered new interface driver qcserial
[    2.732787] s3c-udc : S3C HS USB Device Controller Driver, (c) 2008-2009 Samsung Electronics
[    2.732793] s3c-udc : version 15 March 2009 (DMA Mode)
[    2.735604] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    2.735661] android_usb gadget: Number of LUNs=2
[    2.739798]  lun0: LUN: removable file: (no medium)
[    2.744711]  lun1: LUN: removable file: (no medium)
[    2.749824] android_usb gadget: android_usb ready
[    2.773657] -----------raymanfeng---- s3c_usb_xxx_enable: 1, force to enable
[    2.793686] -----------raymanfeng---- s3c_usb_xxx_enable: 0, force to enable
[    2.803870] mmc2: new SDHC card at address 1234
[    2.804153] mmcblk1: mmc2:1234 SA04G 3.63 GiB 
[    2.805718]  mmcblk1: p1
[    2.813673] Registered gadget driver 'android_usb'
[    2.814268] mousedev: PS/2 mouse device common for all mice
[    2.815278] S3C24XX RTC, (c) 2004,2006 Simtec Electronics
[    2.815379] s3c-rtc s3c64xx-rtc: rtc disabled, re-enabling
[    2.815848] using rtc device, s3c, for alarms
[    2.815905] s3c-rtc s3c64xx-rtc: rtc core: registered s3c as rtc0
[    2.821004] i2c /dev entries driver
[    2.824378] lirc_dev: IR Remote Control driver registered, major 251 
[    2.829751] IR NEC protocol handler initialized
[    2.834279] usb 1-1: new high speed USB device number 2 using s5p-ehci
[    2.840744] IR RC5(x) protocol handler initialized
[    2.845532] IR RC6 protocol handler initialized
[    2.851054] IR JVC protocol handler initialized
[    2.856523] IR Sony protocol handler initialized
[    2.859113] IR RC5 (streamzap) protocol handler initialized
[    2.864656] IR LIRC bridge handler initialized
[    2.869072] Linux video capture interface: v2.00
[    2.873972] mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics
[    2.873977] 
[    2.882501] S3C JPEG Driver, (c) 2007 Samsung Electronics
[    2.887340] JPEG driver for S5PV210
[    2.891156] i2c i2c-1: attached s5p_ddc into i2c adapter successfully
[    2.897254] S5PC11X HPD Driver, (c) 2010 Samsung Electronics
[    2.903248] ###v210hdmi_scan_init();
[    2.906401] S5PC11X CEC Driver, (c) 2010 Samsung Electronics
[    2.912779] S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
[    2.918096] s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
[    2.926455] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[    2.933941] Bluetooth: Virtual HCI driver ver 1.3
[    2.938735] Bluetooth: HCI UART driver ver 2.2
[    2.943007] Bluetooth: HCI H4 protocol initialized
[    2.947749] Bluetooth: HCI BCSP protocol initialized
[    2.952693] Bluetooth: HCILL protocol initialized
[    2.957349] Bluetooth: HCIATH3K protocol initialized
[    2.962331] [## BT ##] init_module
[    2.965728] Initializing wm8976_modinit...
[    2.970225] bt_sleep_probe(); name =-1067355796
[    2.974366] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.979953] usbcore: registered new interface driver btusb
[    2.986167] usbcore: registered new interface driver usbhid
[    2.990914] usbhid: USB HID core driver
[    2.995019] hub 1-1:1.0: USB hub found
[    2.998576] hub 1-1:1.0: 4 ports detected
[    3.002380] logger: created 256K log 'log_main'
[    3.007078] logger: created 256K log 'log_events'
[    3.011742] logger: created 256K log 'log_radio'
[    3.016564] logger: created 256K log 'log_system'
[    3.021507] [wm8978:]select codec wm8994
[    3.024878] ###############wm8994_modinit: start #############
[    3.030972] Error: Driver 'samsung-audio' is already registered, aborting...
[    3.037547] [audio_wm wm8978]:  smdkv210_audio_init start
[    3.042916] select codec wm8994[audio_wm wm8978]: Entered smdkv210_audio_clk_init
[    3.152742] [audio_wm wm8978]: Entered s5pv210_wm8978_init
[    3.153279] asoc: wm8978_codec <-> samsung-i2s.0 mapping ok
[    3.154984] ===wm8994===smdkv2xx_audio_init
[    3.154988] 
[    3.155031] ALSA device list:
[    3.155056]   #0: smdk
[    3.155142] Netfilter messages via NETLINK v0.30.
[    3.157134] nf_conntrack version 0.5.0 (5601 buckets, 22404 max)
[    3.164184] TCP cubic registered
[    3.167057] NET: Registered protocol family 10
[    3.171936] IPv6 over IPv4 tunneling driver
[    3.176118] NET: Registered protocol family 17
[    3.179330] NET: Registered protocol family 15
[    3.183767] Bluetooth: RFCOMM TTY layer initialized
[    3.188595] Bluetooth: RFCOMM socket layer initialized
[    3.193672] Bluetooth: RFCOMM ver 1.11
[    3.197383] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.202687] Bluetooth: BNEP filters: protocol multicast
[    3.207880] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.213890] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
[    3.222560] G-Sensor driver: init
[    3.225901] gsensor_i2c_probe gsensor: OK
[    3.228771] msg _i2c_write i2c read error: -6
[    3.233118] msg _i2c_write i2c read error: -6
[    3.237327] gsensor_i2c_probe gsensor2: Error, code = 1
[    3.242643] i2c-core: driver [gsensor_i2c] using legacy suspend method
[    3.249056] i2c-core: driver [gsensor_i2c] using legacy resume method
[    3.255470] regulator_init_complete: VCC_INTERNAL: incomplete constraints, leaving on
[    3.263267] regulator_init_complete: VCC_ARM: incomplete constraints, leaving on
[    3.270620] regulator_init_complete: VDAC_2.8V: incomplete constraints, leaving on
[    3.278274] regulator_init_complete: pd_mfc_supply: incomplete constraints, leaving on
[    3.286049] regulator_init_complete: pd_tv_supply: incomplete constraints, leaving on
[    3.293849] s5p_uart0_gpio_init
[    3.296983] otg_wakelock_init: No OTG transceiver found
[    3.302182] s3c-rtc s3c64xx-rtc: setting system clock to 2012-10-07 19:39:58 UTC (1349638798)
[    3.310654] [HPD_IF] v210hdmi_socket_timer_routine: ###v210hdmi_socket_timer_routine();   val=[1]###
[    3.319750] [HPD_IF] s5p_hpd_irq_handler: s5p_hpd_irq_handler(), first enter !!
[    3.328531] FIMC0 registered successfully
[    3.332325] FIMC1 registered successfully
[    3.336282] FIMC2 registered successfully
[    3.339116] S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
[    3.345117] s5p-tvout s5p-tvout: hpd status is cable removed
[    3.356880] DBUG_PORT must not use AFC!
[    3.406002] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
[    3.406088] VFS: Mounted root (ext4 filesystem) on device 179:4.
[    3.406174] Freeing init memory: 184K
[    3.435252] init: /init.rc: 557: invalid option 'symlink'
[    3.672986] init: cannot open '/initlogo.rle'
[    3.704670] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    3.709380] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    3.716863] EXT4-fs (mmcblk0p4): re-mounted. Opts: (null)
[    3.731831] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    3.759114] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    3.759776] init: property (null) has no value for writing to /sys/class/android_usb/android0/iProduct
[    3.761674] android_usb: already disabled
[    4.143196] PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [543, drivers/gpu/pvr/s5pc110/sysconfig.c]
[    5.046096] i2c-core: driver [ata2538_i2c] using legacy suspend method
[    5.046152] i2c-core: driver [ata2538_i2c] using legacy resume method
[    5.049446] input: ata2538 as /devices/virtual/input/input1
[    5.320976] usbcore: registered new interface driver smsc95xx
[    5.324746] usbcore: registered new interface driver sr9700_android
[    5.439075] ==ft5x0x_ts_init=
[    5.439145] ft 5x06 ++++++++++++++++++++++++++++ 
[    5.439182] ==ft5x0x_ts_probe=
[    5.439210] select model 712
[    5.439233] ==kzalloc=
[    5.439237] ==i2c_set_clientdata=
[    5.583100] win->id=0, pmem_start=0x4a84b000
[    5.583115] s3cfb s3cfb: [fb0] dma: 0x4a84b000, cpu: 0xf4000000, size: 0x008ca000
[    5.589613] win->id=1, pmem_start=0x4b115000
[    5.589621] s3cfb s3cfb: [fb1] dma: 0x4b115000, cpu: 0xf3400000, size: 0x002ee000
[    5.591991] pmem: request for physical address of pmem region from process 2186.
[    5.599227] HPD status is unplugged
[    5.602303] init: start ~~~~~~~~ bootanim 
[    5.657794] ft5x0x_i2c_txdata i2c write error: -6
[    5.657931] ft5x0x_i2c_txdata i2c write error: -6
[    5.658060] ft5x0x_i2c_txdata i2c write error: -6
[    5.658189] ft5x0x_i2c_txdata i2c write error: -6
[    5.658229] ft5x0x_ts 1-0038: Warnning: I2C connection might be something wrong!
[    5.661656] ft 5x06 ++++++++++++++++++++++++++++ 
[    5.682668] ==ft5x0x_ts_probe=
[    5.682709] select model 712
[    5.682733] ==kzalloc=
[    5.682737] ==i2c_set_clientdata=
[    5.933440] input: ft5x0x_ts as /devices/virtual/input/input2
[    5.934125] ==register_early_suspend =
[    5.935126] ft5x0x_ts 2-0038: =====probe over =====
[    5.935345] ret = 0.
[    5.953512] usbcore: registered new interface driver asix
[    6.062849] mma7660 G-Sensor driver: init
[    6.063782] mma7660_i2c_probe
[    6.063812] mma7660: s_i2c_client->addr = 0x4c
[    6.064007] mma7660
[    6.064890] mma7660_chip_init
[    6.135253] input: s3c-button as /devices/virtual/input/input3
[    6.135909] s3c button Initialized!!
[    6.167310] NTFS driver 2.1.30 [Flags: R/W MODULE].
[    6.191432] ++ Urbetter Battery driver init.
[    6.191846] ++ Urbetter Battery driver init----.
[    6.192145] ++ Urbetter Battery driver init.---1
[    6.192579] ++ Urbetter Battery driver init.---2
[    6.192658] Urbetter Battery driver init.
[    6.192742] select model 712
[    6.194736] ####[s5pv210 bat ]: poll_adc_raw(0).
[    6.195509] ####[s5pv210 bat ]: voltage:7440, percent:44
[    6.208041] usbcore: registered new interface driver dm9601
[   10.474876] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[   10.589053] mma7660_chip_init
[   14.184227] request_suspend_state: wakeup (3->0) at 13636602851 (2012-10-07 19:40:09.380906057 UTC)
[   14.358931] [ ut_bt_dev ]: ut_bt_dev_open();
[   14.358982] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60004] arg[1389919172]
[   14.359032] [ ut_bt_dev ]:  IOCTL_BT_DEV_POWER    cmd[60004] parm1[1]
[   14.359082] [ ut_bt_dev ]: ##ut_bt_power33_control(1); ==============power_33===
[   14.526169] init: start ~~~~~~~~ switch_mode 
[   14.545981] acc_open
[   14.546020] acc_release
[   14.982742] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60005] arg[1389919160]
[   14.982799]  IOCTL_BT_DEV_SPECIFIC    cmd[60005]
[   14.982836] [ ut_bt_dev ]:  module[86, 0, 0]
[   14.982886] [ ut_bt_dev ]: ut_bt_dev_release();
[   14.983124] init: start ~~~~~~~~ hciattach 
[   15.062163] unknown clock source sclk_uart
[   15.062210] set baud = 9600 quot = 433 /dev/s3c2410_serial1 baudclk_rate = 66700000 
[   15.062313] set baud = 9600 quot = 433 /dev/s3c2410_serial1 baudclk_rate = 66700000 
[   15.118005] set baud = 115200 quot = 35 /dev/s3c2410_serial1 baudclk_rate = 66700000 
[   15.118116] [ ut_bt_dev ]: ut_bt_dev_open();
[   15.118175] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60006] arg[-1096660476]
[   15.118226] [ ut_bt_dev ]:  IOCTL_BT_DEV_CTRL    cmd[60006] parm1[0]
[   15.121503] [ ut_bt_dev ]: ut_bt_ldo_power_ctr(); onoff=0
[   15.157692] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[0] arg[60006]
[   15.157743]  default  [## BT ##] ut_bt_dev_ioctl cmd[0]
[   15.157785] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60006] arg[-1096660468]
[   15.157835] [ ut_bt_dev ]:  IOCTL_BT_DEV_CTRL    cmd[60006] parm1[1]
[   15.163841] [ ut_bt_dev ]: ut_bt_ldo_power_ctr(); onoff=1
[   15.232683] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[0] arg[60006]
[   15.232734]  default  [## BT ##] ut_bt_dev_ioctl cmd[0]
[   16.404812] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60006] arg[-1096660476]
[   16.404870] [ ut_bt_dev ]:  IOCTL_BT_DEV_CTRL    cmd[60006] parm1[0]
[   16.404921] [ ut_bt_dev ]: ut_bt_ldo_power_ctr(); onoff=0
[   16.422688] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[0] arg[60006]
[   16.422739]  default  [## BT ##] ut_bt_dev_ioctl cmd[0]
[   16.422781] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[60006] arg[-1096660468]
[   16.422831] [ ut_bt_dev ]:  IOCTL_BT_DEV_CTRL    cmd[60006] parm1[1]
[   16.424731] [ ut_bt_dev ]: ut_bt_ldo_power_ctr(); onoff=1
[   16.517685] [ ut_bt_dev ]:  ut_bt_dev_ioctl cmd[0] arg[60006]
[   16.517736]  default  [## BT ##] ut_bt_dev_ioctl cmd[0]
[   18.089560] [ ut_bt_dev ]: ut_bt_dev_release();
[   18.096342] set baud = 2000000 quot = 1 /dev/s3c2410_serial1 baudclk_rate = 66700000 
[   18.116526] init: start ~~~~~~~~ bluetoothd 
[   20.444743] [audio_wm wm8978]: ======== enter s5pv210_hifi_hw_params1,format=2,rate=44100 =======
[   20.444839] EPLL Rate changes from 80000000 to 45158400
[   21.227709] ####[s5pv210 bat ]: poll_adc_raw(0).
[   21.228484] ####[s5pv210 bat ]: voltage:7404, percent:37
[   23.839159] FAT-fs (mmcblk0p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   23.839167] 
[   24.935824] FAT-fs (mmcblk1p1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   24.935833] 
[   27.741105] mmcblk1: error -84 transferring data, sector 88192, nr 128, cmd response 0x900, card status 0xb00
[   27.741198] mmcblk1: retrying using single block read
[   36.258396] ####[s5pv210 bat ]: poll_adc_raw(0).
[   36.259171] ####[s5pv210 bat ]: voltage:7380, percent:33
[   51.287651] ####[s5pv210 bat ]: poll_adc_raw(0).
[   51.288434] ####[s5pv210 bat ]: voltage:7401, percent:37
[   66.317640] ####[s5pv210 bat ]: poll_adc_raw(0).
[   66.318412] ####[s5pv210 bat ]: voltage:7452, percent:46
[   67.707805] usb 1-1.4: new high speed USB device number 3 using s5p-ehci
[   67.733011] hub 1-1:1.0: unable to enumerate USB device on port 4
[   67.967796] usb 1-1.4: new high speed USB device number 4 using s5p-ehci
[   67.993003] hub 1-1:1.0: unable to enumerate USB device on port 4
[   68.222791] usb 1-1.4: new high speed USB device number 5 using s5p-ehci
[   68.248001] hub 1-1:1.0: unable to enumerate USB device on port 4
[   68.477794] usb 1-1.4: new high speed USB device number 6 using s5p-ehci
[   68.502999] hub 1-1:1.0: unable to enumerate USB device on port 4
[   68.732790] usb 1-1.4: new high speed USB device number 7 using s5p-ehci
[   68.757998] hub 1-1:1.0: unable to enumerate USB device on port 4
[   68.987787] usb 1-1.4: new high speed USB device number 8 using s5p-ehci
[   69.012994] hub 1-1:1.0: unable to enumerate USB device on port 4
[   69.247942] usb 1-1.4: new high speed USB device number 9 using s5p-ehci
[   69.273014] hub 1-1:1.0: unable to enumerate USB device on port 4
[   69.502814] usb 1-1.4: new high speed USB device number 10 using s5p-ehci
[   69.528008] hub 1-1:1.0: unable to enumerate USB device on port 4
[   69.757789] usb 1-1.4: new high speed USB device number 11 using s5p-ehci
[   69.782994] hub 1-1:1.0: unable to enumerate USB device on port 4
[   70.012788] usb 1-1.4: new high speed USB device number 12 using s5p-ehci
[   70.037994] hub 1-1:1.0: unable to enumerate USB device on port 4
[   70.267830] usb 1-1.4: new high speed USB device number 13 using s5p-ehci
[   70.293023] hub 1-1:1.0: unable to enumerate USB device on port 4
[   70.527953] usb 1-1.4: new high speed USB device number 14 using s5p-ehci
[   70.553013] hub 1-1:1.0: unable to enumerate USB device on port 4
[   70.782996] usb 1-1.4: new high speed USB device number 15 using s5p-ehci
[   70.808128] hub 1-1:1.0: unable to enumerate USB device on port 4
[   70.983121] hub 1-1:1.0: unable to enumerate USB device on port 4
[   71.292787] usb 1-1.4: new high speed USB device number 17 using s5p-ehci
[   71.317989] hub 1-1:1.0: unable to enumerate USB device on port 4
[   71.548754] usb 1-1.4: new high speed USB device number 18 using s5p-ehci
[   71.573124] hub 1-1:1.0: unable to enumerate USB device on port 4
[   71.809541] usb 1-1.4: new high speed USB device number 19 using s5p-ehci
[   71.833125] hub 1-1:1.0: unable to enumerate USB device on port 4
[   72.008366] hub 1-1:1.0: unable to enumerate USB device on port 4
[   72.318438] usb 1-1.4: new high speed USB device number 21 using s5p-ehci
[   72.343113] hub 1-1:1.0: unable to enumerate USB device on port 4
[   72.572766] usb 1-1.4: new high speed USB device number 22 using s5p-ehci
[   72.597973] hub 1-1:1.0: unable to enumerate USB device on port 4
[   72.827761] usb 1-1.4: new high speed USB device number 23 using s5p-ehci
[   72.852963] hub 1-1:1.0: unable to enumerate USB device on port 4
[   73.082751] usb 1-1.4: new high speed USB device number 24 using s5p-ehci
[   73.107963] hub 1-1:1.0: unable to enumerate USB device on port 4
[   73.342756] usb 1-1.4: new high speed USB device number 25 using s5p-ehci
[   73.367962] hub 1-1:1.0: unable to enumerate USB device on port 4
[   73.598423] usb 1-1.4: new high speed USB device number 26 using s5p-ehci
[   73.623104] hub 1-1:1.0: unable to enumerate USB device on port 4
[   73.853031] usb 1-1.4: new high speed USB device number 27 using s5p-ehci
[   73.878154] hub 1-1:1.0: unable to enumerate USB device on port 4
[   74.107789] usb 1-1.4: new high speed USB device number 28 using s5p-ehci
[   74.133097] hub 1-1:1.0: unable to enumerate USB device on port 4
[   74.367750] usb 1-1.4: new high speed USB device number 29 using s5p-ehci
[   74.392955] hub 1-1:1.0: unable to enumerate USB device on port 4
[   74.622746] usb 1-1.4: new high speed USB device number 30 using s5p-ehci
[   74.647957] hub 1-1:1.0: unable to enumerate USB device on port 4
[   74.877886] usb 1-1.4: new high speed USB device number 31 using s5p-ehci
[   74.902954] hub 1-1:1.0: unable to enumerate USB device on port 4
[   75.132746] usb 1-1.4: new high speed USB device number 32 using s5p-ehci
[   75.157952] hub 1-1:1.0: unable to enumerate USB device on port 4
[   75.387745] usb 1-1.4: new high speed USB device number 33 using s5p-ehci
[   75.412948] hub 1-1:1.0: unable to enumerate USB device on port 4
[   75.642735] usb 1-1.4: new high speed USB device number 34 using s5p-ehci
[   75.667944] hub 1-1:1.0: unable to enumerate USB device on port 4
[   75.902730] usb 1-1.4: new high speed USB device number 35 using s5p-ehci
[   75.927938] hub 1-1:1.0: unable to enumerate USB device on port 4
[   76.108079] hub 1-1:1.0: unable to enumerate USB device on port 4
[   76.412735] usb 1-1.4: new high speed USB device number 37 using s5p-ehci
[   76.437943] hub 1-1:1.0: unable to enumerate USB device on port 4
[   76.667856] usb 1-1.4: new high speed USB device number 38 using s5p-ehci
[   76.692937] hub 1-1:1.0: unable to enumerate USB device on port 4
[   76.868937] hub 1-1:1.0: unable to enumerate USB device on port 4
[   77.182935] usb 1-1.4: new high speed USB device number 40 using s5p-ehci
[   77.208063] hub 1-1:1.0: unable to enumerate USB device on port 4
[   77.437852] usb 1-1.4: new high speed USB device number 41 using s5p-ehci
[   77.463057] hub 1-1:1.0: unable to enumerate USB device on port 4
[   77.692866] usb 1-1.4: new high speed USB device number 42 using s5p-ehci
[   77.718060] hub 1-1:1.0: unable to enumerate USB device on port 4
[   77.947847] usb 1-1.4: new high speed USB device number 43 using s5p-ehci
[   77.973052] hub 1-1:1.0: unable to enumerate USB device on port 4
[   78.202838] usb 1-1.4: new high speed USB device number 44 using s5p-ehci
[   78.228055] hub 1-1:1.0: unable to enumerate USB device on port 4
[   78.462869] usb 1-1.4: new high speed USB device number 45 using s5p-ehci
[   78.488066] hub 1-1:1.0: unable to enumerate USB device on port 4
[   78.717842] usb 1-1.4: new high speed USB device number 46 using s5p-ehci
[   78.743047] hub 1-1:1.0: unable to enumerate USB device on port 4
[   78.972833] usb 1-1.4: new high speed USB device number 47 using s5p-ehci
[   78.998061] hub 1-1:1.0: unable to enumerate USB device on port 4
[   79.227831] usb 1-1.4: new high speed USB device number 48 using s5p-ehci
[   79.253036] hub 1-1:1.0: unable to enumerate USB device on port 4
[   79.482831] usb 1-1.4: new high speed USB device number 49 using s5p-ehci
[   79.508038] hub 1-1:1.0: unable to enumerate USB device on port 4
[   79.742826] usb 1-1.4: new high speed USB device number 50 using s5p-ehci
[   79.768060] hub 1-1:1.0: unable to enumerate USB device on port 4
[   79.997852] usb 1-1.4: new high speed USB device number 51 using s5p-ehci
[   80.023052] hub 1-1:1.0: unable to enumerate USB device on port 4
[   80.252828] usb 1-1.4: new high speed USB device number 52 using s5p-ehci
[   80.278034] hub 1-1:1.0: unable to enumerate USB device on port 4
[   80.507835] usb 1-1.4: new high speed USB device number 53 using s5p-ehci
[   80.533032] hub 1-1:1.0: unable to enumerate USB device on port 4
[   80.762815] usb 1-1.4: new high speed USB device number 54 using s5p-ehci
[   80.788027] hub 1-1:1.0: unable to enumerate USB device on port 4
[   81.022841] usb 1-1.4: new high speed USB device number 55 using s5p-ehci
[   81.048032] hub 1-1:1.0: unable to enumerate USB device on port 4
[   81.277819] usb 1-1.4: new high speed USB device number 56 using s5p-ehci
[   81.303026] hub 1-1:1.0: unable to enumerate USB device on port 4
[   81.347640] ####[s5pv210 bat ]: poll_adc_raw(0).
[   81.348408] ####[s5pv210 bat ]: voltage:7446, percent:45
[   81.532816] usb 1-1.4: new high speed USB device number 57 using s5p-ehci
[   81.558026] hub 1-1:1.0: unable to enumerate USB device on port 4
[   81.787811] usb 1-1.4: new high speed USB device number 58 using s5p-ehci
[   81.813037] hub 1-1:1.0: unable to enumerate USB device on port 4
[   82.047811] usb 1-1.4: new high speed USB device number 59 using s5p-ehci
[   82.073014] hub 1-1:1.0: unable to enumerate USB device on port 4
[   82.302817] usb 1-1.4: new high speed USB device number 60 using s5p-ehci
[   82.328028] hub 1-1:1.0: unable to enumerate USB device on port 4
[   82.557804] usb 1-1.4: new high speed USB device number 61 using s5p-ehci
[   82.583050] hub 1-1:1.0: unable to enumerate USB device on port 4
[   82.812801] usb 1-1.4: new high speed USB device number 62 using s5p-ehci
[   82.838010] hub 1-1:1.0: unable to enumerate USB device on port 4
[   83.067856] usb 1-1.4: new high speed USB device number 63 using s5p-ehci
[   83.093012] hub 1-1:1.0: unable to enumerate USB device on port 4
[   83.322821] usb 1-1.4: new high speed USB device number 64 using s5p-ehci
[   83.348013] hub 1-1:1.0: unable to enumerate USB device on port 4
[   83.582818] usb 1-1.4: new high speed USB device number 65 using s5p-ehci
[   83.608010] hub 1-1:1.0: unable to enumerate USB device on port 4
[   83.837793] usb 1-1.4: new high speed USB device number 66 using s5p-ehci
[   83.862999] hub 1-1:1.0: unable to enumerate USB device on port 4
[   84.092920] usb 1-1.4: new high speed USB device number 67 using s5p-ehci
[   84.118000] hub 1-1:1.0: unable to enumerate USB device on port 4
[   84.347790] usb 1-1.4: new high speed USB device number 68 using s5p-ehci
[   84.372994] hub 1-1:1.0: unable to enumerate USB device on port 4
[   84.607794] usb 1-1.4: new high speed USB device number 69 using s5p-ehci
[   84.632998] hub 1-1:1.0: unable to enumerate USB device on port 4
[   84.862785] usb 1-1.4: new high speed USB device number 70 using s5p-ehci
[   84.887991] hub 1-1:1.0: unable to enumerate USB device on port 4
[   85.117873] usb 1-1.4: new high speed USB device number 71 using s5p-ehci
[   85.143005] hub 1-1:1.0: unable to enumerate USB device on port 4
[   85.372785] usb 1-1.4: new high speed USB device number 72 using s5p-ehci
[   85.397992] hub 1-1:1.0: unable to enumerate USB device on port 4
[   85.627801] usb 1-1.4: new high speed USB device number 73 using s5p-ehci
[   85.652994] hub 1-1:1.0: unable to enumerate USB device on port 4
[   85.884495] usb 1-1.4: new high speed USB device number 74 using s5p-ehci
[   85.913008] hub 1-1:1.0: unable to enumerate USB device on port 4
[   86.142964] usb 1-1.4: new high speed USB device number 75 using s5p-ehci
[   86.167999] hub 1-1:1.0: unable to enumerate USB device on port 4
[   86.397777] usb 1-1.4: new high speed USB device number 76 using s5p-ehci
[   86.422980] hub 1-1:1.0: unable to enumerate USB device on port 4
[   86.652772] usb 1-1.4: new high speed USB device number 77 using s5p-ehci
[   86.677977] hub 1-1:1.0: unable to enumerate USB device on port 4
[   86.907793] usb 1-1.4: new high speed USB device number 78 using s5p-ehci
[   86.933106] hub 1-1:1.0: unable to enumerate USB device on port 4
[   87.162767] usb 1-1.4: new high speed USB device number 79 using s5p-ehci
[   87.187974] hub 1-1:1.0: unable to enumerate USB device on port 4
[   87.422789] usb 1-1.4: new high speed USB device number 80 using s5p-ehci
[   87.448118] hub 1-1:1.0: unable to enumerate USB device on port 4
[   87.682768] usb 1-1.4: new high speed USB device number 81 using s5p-ehci
[   87.707976] hub 1-1:1.0: unable to enumerate USB device on port 4
[   87.932982] usb 1-1.4: new high speed USB device number 82 using s5p-ehci
[   87.963109] hub 1-1:1.0: unable to enumerate USB device on port 4
[   88.187762] usb 1-1.4: new high speed USB device number 83 using s5p-ehci
[   88.212970] hub 1-1:1.0: unable to enumerate USB device on port 4
[   88.442758] usb 1-1.4: new high speed USB device number 84 using s5p-ehci
[   88.467965] hub 1-1:1.0: unable to enumerate USB device on port 4
[   88.702776] usb 1-1.4: new high speed USB device number 85 using s5p-ehci
[   88.727967] hub 1-1:1.0: unable to enumerate USB device on port 4
[   88.957758] usb 1-1.4: new high speed USB device number 86 using s5p-ehci
[   88.982963] hub 1-1:1.0: unable to enumerate USB device on port 4
[   89.212749] usb 1-1.4: new high speed USB device number 87 using s5p-ehci
[   89.237959] hub 1-1:1.0: unable to enumerate USB device on port 4
[   89.467771] usb 1-1.4: new high speed USB device number 88 using s5p-ehci
[   89.492960] hub 1-1:1.0: unable to enumerate USB device on port 4
[   89.722746] usb 1-1.4: new high speed USB device number 89 using s5p-ehci
[   89.747953] hub 1-1:1.0: unable to enumerate USB device on port 4
[   89.982764] usb 1-1.4: new high speed USB device number 90 using s5p-ehci
[   90.008089] hub 1-1:1.0: unable to enumerate USB device on port 4
[   90.237895] usb 1-1.4: new high speed USB device number 91 using s5p-ehci
[   90.262963] hub 1-1:1.0: unable to enumerate USB device on port 4
[   90.492763] usb 1-1.4: new high speed USB device number 92 using s5p-ehci
[   90.517951] hub 1-1:1.0: unable to enumerate USB device on port 4
[   90.693084] hub 1-1:1.0: unable to enumerate USB device on port 4
[   91.002741] usb 1-1.4: new high speed USB device number 94 using s5p-ehci
[   91.027947] hub 1-1:1.0: unable to enumerate USB device on port 4
[   91.208082] hub 1-1:1.0: unable to enumerate USB device on port 4
[   91.517738] usb 1-1.4: new high speed USB device number 96 using s5p-ehci
[   91.542943] hub 1-1:1.0: unable to enumerate USB device on port 4
[   91.772729] usb 1-1.4: new high speed USB device number 97 using s5p-ehci
[   91.797937] hub 1-1:1.0: unable to enumerate USB device on port 4
[   92.027727] usb 1-1.4: new high speed USB device number 98 using s5p-ehci
[   92.052933] hub 1-1:1.0: unable to enumerate USB device on port 4
[   92.228055] hub 1-1:1.0: unable to enumerate USB device on port 4
[   92.542723] usb 1-1.4: new high speed USB device number 100 using s5p-ehci
[   92.568056] hub 1-1:1.0: unable to enumerate USB device on port 4
[   92.797853] usb 1-1.4: new high speed USB device number 101 using s5p-ehci
[   92.823057] hub 1-1:1.0: unable to enumerate USB device on port 4
[   93.052844] usb 1-1.4: new high speed USB device number 102 using s5p-ehci
[   93.078052] hub 1-1:1.0: unable to enumerate USB device on port 4
[   93.307918] usb 1-1.4: new high speed USB device number 103 using s5p-ehci
[   93.333690] hub 1-1:1.0: unable to enumerate USB device on port 4
[   93.562847] usb 1-1.4: new high speed USB device number 104 using s5p-ehci
[   93.588054] hub 1-1:1.0: unable to enumerate USB device on port 4
[   93.822837] usb 1-1.4: new high speed USB device number 105 using s5p-ehci
[   93.848046] hub 1-1:1.0: unable to enumerate USB device on port 4
[   94.077846] usb 1-1.4: new high speed USB device number 106 using s5p-ehci
[   94.103047] hub 1-1:1.0: unable to enumerate USB device on port 4
[   94.332835] usb 1-1.4: new high speed USB device number 107 using s5p-ehci
[   94.358042] hub 1-1:1.0: unable to enumerate USB device on port 4
[   94.587832] usb 1-1.4: new high speed USB device number 108 using s5p-ehci
[   94.613037] hub 1-1:1.0: unable to enumerate USB device on port 4
[   94.842825] usb 1-1.4: new high speed USB device number 109 using s5p-ehci
[   94.868037] hub 1-1:1.0: unable to enumerate USB device on port 4
[   95.102828] usb 1-1.4: new high speed USB device number 110 using s5p-ehci
[   95.128102] hub 1-1:1.0: unable to enumerate USB device on port 4
[   95.357828] usb 1-1.4: new high speed USB device number 111 using s5p-ehci
[   95.383031] hub 1-1:1.0: unable to enumerate USB device on port 4
[   95.612846] usb 1-1.4: new high speed USB device number 112 using s5p-ehci
[   95.638038] hub 1-1:1.0: unable to enumerate USB device on port 4
[   95.867825] usb 1-1.4: new high speed USB device number 113 using s5p-ehci
[   95.893053] hub 1-1:1.0: unable to enumerate USB device on port 4
[   96.122819] usb 1-1.4: new high speed USB device number 114 using s5p-ehci
[   96.148027] hub 1-1:1.0: unable to enumerate USB device on port 4
[   96.377682] ####[s5pv210 bat ]: poll_adc_raw(0).
[   96.378476] ####[s5pv210 bat ]: voltage:7389, percent:35
[   96.384788] usb 1-1.4: new high speed USB device number 115 using s5p-ehci
[   96.413041] hub 1-1:1.0: unable to enumerate USB device on port 4
[   96.637818] usb 1-1.4: new high speed USB device number 116 using s5p-ehci
[   96.663048] hub 1-1:1.0: unable to enumerate USB device on port 4
[   96.892811] usb 1-1.4: new high speed USB device number 117 using s5p-ehci
[   96.918021] hub 1-1:1.0: unable to enumerate USB device on port 4
[   97.147818] usb 1-1.4: new high speed USB device number 118 using s5p-ehci
[   97.173022] hub 1-1:1.0: unable to enumerate USB device on port 4
[   97.402810] usb 1-1.4: new high speed USB device number 119 using s5p-ehci
[   97.428016] hub 1-1:1.0: unable to enumerate USB device on port 4
[   97.662803] usb 1-1.4: new high speed USB device number 120 using s5p-ehci
[   97.688014] hub 1-1:1.0: unable to enumerate USB device on port 4
[   97.917811] usb 1-1.4: new high speed USB device number 121 using s5p-ehci
[   97.943015] hub 1-1:1.0: unable to enumerate USB device on port 4
[   98.172827] usb 1-1.4: new high speed USB device number 122 using s5p-ehci
[   98.198074] hub 1-1:1.0: unable to enumerate USB device on port 4
[   98.427807] usb 1-1.4: new high speed USB device number 123 using s5p-ehci
[   98.453012] hub 1-1:1.0: unable to enumerate USB device on port 4
[   98.682824] usb 1-1.4: new high speed USB device number 124 using s5p-ehci
[   98.708028] hub 1-1:1.0: unable to enumerate USB device on port 4
[   98.942802] usb 1-1.4: new high speed USB device number 125 using s5p-ehci
[   98.968008] hub 1-1:1.0: unable to enumerate USB device on port 4
[   99.197807] usb 1-1.4: new high speed USB device number 126 using s5p-ehci
[   99.223006] hub 1-1:1.0: unable to enumerate USB device on port 4
[   99.452796] usb 1-1.4: new high speed USB device number 127 using s5p-ehci
[   99.477998] hub 1-1:1.0: unable to enumerate USB device on port 4
[   99.707790] usb 1-1.4: new high speed USB device number 3 using s5p-ehci
[   99.732995] hub 1-1:1.0: unable to enumerate USB device on port 4
[   99.962790] usb 1-1.4: new high speed USB device number 4 using s5p-ehci
[   99.987996] hub 1-1:1.0: unable to enumerate USB device on port 4
[  100.222786] usb 1-1.4: new high speed USB device number 5 using s5p-ehci
[  100.247993] hub 1-1:1.0: unable to enumerate USB device on port 4
[  100.477784] usb 1-1.4: new high speed USB device number 6 using s5p-ehci
[  100.502990] hub 1-1:1.0: unable to enumerate USB device on port 4
[  100.732783] usb 1-1.4: new high speed USB device number 7 using s5p-ehci
[  100.757989] hub 1-1:1.0: unable to enumerate USB device on port 4
[  100.987778] usb 1-1.4: new high speed USB device number 8 using s5p-ehci
[  101.012985] hub 1-1:1.0: unable to enumerate USB device on port 4
[  101.242776] usb 1-1.4: new high speed USB device number 9 using s5p-ehci
[  101.267986] hub 1-1:1.0: unable to enumerate USB device on port 4
[  101.502779] usb 1-1.4: new high speed USB device number 10 using s5p-ehci
[  101.527997] hub 1-1:1.0: unable to enumerate USB device on port 4
