Погуглив я тут нашел кое что на тему прошивки
Скачать прошивку можно
ftp://ftp.krsu.edu.kg/incoming/New_S...irmware/fw.rar
но доступно только в зоне KG (кто оттуда - постарайтесь !)
взято это с
http://shop.ebay.kg/firmware/ - там же и инструкция по прошивке.
Кроме того я нашел оригинальную инструкцию по прошивке в FAQе на корейском языке на
http://www.ubone.co.kr/cs/faq_list.asp?gubun=5
(первый вопрос из двух)
по запросу гугля она легко находится -
http://www.google.com/search?q=%28_ub1romXXX.zip%29
однако там сейчас сенили инфу и висит рекомендация отправлять устройства для прошивки в офис их конторы. (гугль преводчик вам поможет)
Но... есть же еще гугль кеш
http://209.85.129.132/search?q=cache...&hl=ru&ct=clnk
После перевода вот такая инструкция
Цитата:
1 [Firmware] How do I upgrade the firmware? 2008-04-08
1. Check the current SW version
2. Copy the file to the SD card upgrade
3. Must put the power of the DRS-1100 UPGRADE
4. Work automatically after reboot
5. Last SW version check
Be sure to read the following description ?. ?
0) to check the current Firmware version.
? SD card's root directory with Notepad to open a file _version.txt SW: 0223 confirm this or not.
? Yes) MODEL: 11000, HW: 100, SW: 0223, KR, GMT009
? > SW: 0223 (Firmware version 223 lm)
? If SW: 0223 if (that is, the upgrade version and the version below if you do not run) does not run the upgrade.
1) SD Card all files, all of then, the compressed file (_ub1romXXX.zip) unpack, that's in the upgrade file (_ub1rom.bin) is copied to the SD Card.
Other than the file name you _ub1rom.bin ? name (for example: _ub1rom_fw63.bin, etc.) if you are
Should change the name to be _ub1rom.bin ? possible upgrade.
? In the Windows Explorer, the "_ub1rom.bin" file, right mouse button on the nureunhu
? Select Send > removable disk.
? Select the removable disk in Explorer, and SD card "ub1rom.bin" Make sure the files are copied.
2) DRS-1100, except for the power, the car keys hankanman (KEY OFF -> KEY ON) and walk around.
! I can not start hitting. !
? Why should not the car's engine and hitting the car started him when he made the most of the car, sigajaek could cut off the power momentarily, the power cut off during the upgrade of the DRS-1100 A / S Center, the symptoms leave occurrence. .
(Time, be careful because of the cost of money)
3) Insert the SD card in the DRS-1100 first, DRS-1100 say the power cable.
4) Upgrade of the LED flashes red and blue georinda.
(! Ppaegeona the power cable, do not bet started.!)
5) Record LED (red) flashes, the normal behavior. The upgrade is complete.
6) ? SD card is to install X-Driven_Installer.exe ..
-> The existing installation, the X-driven eopgeureyidoen video data in the previous version 1.0.6.x can not recall. Must be included in the SD card to your PC, install the X-Driven.
7) Make sure that the upgrade.
Above 0) on how to check the current Firmware version follows.
_version.txt In the root directory of SD card in the file, open Notepad is an upgraded version (eg, SW: 0223 is), check ...
For example) MODEL: 11000, HW: 100, SW: 0223, KR, GMT009
[Firmware] Firmware version How can I do? 2008-04-08
SD card that contains the "_version.txt" double-clicking the file and open it to see
You can check version information.
For example) "SW: 01C0" if the firmware version "01C0" is.
|