Всё работает, congif:
; LVDS Enable
;---------------------------------------
; Select a single value from this list:
; 1 : Enabled
; 0 : Disabled (default)
Value=1
[SETTING_0501]
;
; LVDS Configuration Changes
;---------------------------------------
; Select a single value from this list:
; 1 : Locked
; 0 : Unlocked (default)
Value=0
[SETTING_050D]
;
; Monitor Configuration
;---------------------------------------
; Select a single value from this list:
; 1 : Manual
; 0 : EDID (default)
Value=1
[SETTING_050E]
;
; Resolution
;---------------------------------------
; Select a single value from this list:
; 0 : 320 x 200
; 1 : 320 x 240
; 2 : 640 x 480 (default)
; 3 : 720 x 480
; 4 : 800 x 480
; 5 : 854 x 480
; 6 : 768 x 576
; 7 : 800 x 600
; 8 : 1024 x 600
; 9 : 1080 x 720
; 10 : 1024 x 768
; 11 : 1152 x 768
; 12 : 1280 x 768
; 13 : 1360 x 768
; 14 : 1366 x 768
; 15 : 1280 x 800
; 16 : 1280 x 854
; 17 : 1440 x 900
; 18 : 1680 x 945
; 19 : 1280 x 960
; 20 : 1440 x 960
; 21 : 1280 x 1024
; 22 : 1400 x 1050
; 23 : 1680 x 1050
; 26 : 1600 x 1200
Value=10
[SETTING_050F]
;
; Pixel Clock (x10kHz)
;---------------------------------------
; Select a number between 0 and 32767 in
; increments of 1. Default value is 0.
Value=6500
[SETTING_0510]
;
; Horizontal Blanking (pixels)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=320
[SETTING_0511]
;
; Vertical Blanking (lines)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=38
[SETTING_0512]
;
; Horizontal Sync Offset (pixels)
;---------------------------------------
; Select a number between 0 and 1023 in
; increments of 1. Default value is 0.
Value=24
[SETTING_0513]
;
; Vertical Sync Offset (lines)
;---------------------------------------
; Select a number between 0 and 63 in
; increments of 1. Default value is 0.
Value=3
[SETTING_0514]
;
; Horizontal Sync Pulse Width (pixels)
;---------------------------------------
; Select a number between 0 and 1023 in
; increments of 1. Default value is 0.
Value=136
[SETTING_0515]
;
; Vertical Sync Pulse Width (lines)
;---------------------------------------
; Select a number between 0 and 63 in
; increments of 1. Default value is 0.
Value=6
[SETTING_0516]
;
; Horizontal Border (pixels)
;---------------------------------------
; Select a number between 0 and 255 in
; increments of 1. Default value is 0.
Value=1
[SETTING_0517]
;
; Vertical Border (lines)
;---------------------------------------
; Select a number between 0 and 255 in
; increments of 1. Default value is 0.
Value=1
[SETTING_0518]
;
; Horizontal Image Size (mm)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=304
[SETTING_0519]
;
; Vertical Image Size (mm)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=228
[SETTING_051A]
;
; Horizontal Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Positive (default)
; 1 : Negative
Value=0
[SETTING_051B]
;
; Vertical Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Positive (default)
; 1 : Negative
Value=0
[SETTING_051C]
;
; Image Interlace Mode
;---------------------------------------
; Select a single value from this list:
; 0 : Non-Interlaced (default)
; 1 : Interlaced
Value=0
[SETTING_0502]
;
; Inverter Frequency (Hz)
;---------------------------------------
; Select a number between 200 and 40000 in
; increments of 1. Default value is 200.
Value=20000
[SETTING_0505]
;
; Inverter Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Normal (default)
; 1 : Inverted
Value=0
[SETTING_0504]
;
; Minimum Inverter Current Limit (%)
;---------------------------------------
; Select a number between 0 and 99 in
; increments of 1. Default value is 30.
Value=30
[SETTING_0043]
Всем спасибо за внимание!
|