добрый день!
Есть D525MWV и матрица G150XG03 V.1
http://www.displayalliance.com/stora...0XG03%20V1.pdf
Что мне нужно прописать в этих настройках:
Заранее благодарен!
; Pixel Clock (x10kHz)
;---------------------------------------
; Select a number between 0 and 65535 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0510]
;
; Horizontal Blanking (pixels)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0511]
;
; Vertical Blanking (lines)
;---------------------------------------
; Select a number between 0 and 4095 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0512]
;
; Horizontal Sync Offset (pixels)
;---------------------------------------
; Select a number between 0 and 1023 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0513]
;
; Vertical Sync Offset (lines)
;---------------------------------------
; Select a number between 0 and 63 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0514]
;
; Horizontal Sync Pulse Width (pixels)
;---------------------------------------
; Select a number between 0 and 1023 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0515]
;
; Vertical Sync Pulse Width (lines)
;---------------------------------------
; Select a number between 0 and 63 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0516]
;
; Horizontal Border (pixels)
;---------------------------------------
; Select a number between 0 and 255 in
; increments of 1. Default value is 0.
Value=0
[SETTING_0517]
;
; Vertical Border (lines)
;---------------------------------------
; Select a number between 0 and 255 in
; increments of 1. Default value is 0.
Value=0
[SETTING_051A]
;
; Horizontal Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Positive
; 1 : Negative (default)
Value=1
[SETTING_051B]
;
; Vertical Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Positive
; 1 : Negative (default)
Value=1
[SETTING_051C]
;
; Image Interlace Mode
;---------------------------------------
; Select a single value from this list:
; 0 : Non-Interlaced (default)
; 1 : Interlaced
Value=0
[SETTING_0502]
;
; Inverter Frequency (Hz)
;---------------------------------------
; Select a number between 200 and 40000 in
; increments of 1. Default value is 200.
Value=200
[SETTING_0505]
;
; Inverter Polarity
;---------------------------------------
; Select a single value from this list:
; 0 : Normal (default)
; 1 : Inverted
Value=0
[SETTING_0503]
;
; Maximum Inverter Current Limit (%)
;---------------------------------------
; Select a number between 0 and 100 in
; increments of 1. Default value is 50.
Value=50
[SETTING_0504]
;
; Minimum Inverter Current Limit (%)
;---------------------------------------
; Select a number between 0 and 100 in
; increments of 1. Default value is 30.
Value=30